What's it called?
 

I don't know what this screw / anchor thing is called. It's plastic and there's two that holds the Evo VIII intake down... I uh... lost one and i'm looking to replace it. Any help? Thanks in advance {thumbup}

It's just a reusable clip - not sure of the official name. Get one from your trunk lining.

Trunk where?

Ooo ok thanks.

I also found it on lancershop... pretty expensive.. for a plastic screw (Poppet Fastener)... lol

http://www.lancershop.com/customer/p...&cat=15&page=1

Guess i'll just take it from my trunk lining. Thanks for the info guys.

If you want a new one you can those things at a hardware store cheap. Back in the day when I used to work on systems I used to break and lose those things all the time when working in trunks and you can find a variety of different but similar ones at an auto store or hardware store. I always got them at Lowe's for super cheap.

Yeah, they're stupid expensive. I had to buy a set of 10 from Mitsu after I used up half my trunk clips, and I think it cost $20.

wow.. I'll give it a try in Lowes and home depot and see if i can find any.

They are called poppet fastners and like turbevo8 said you can get them at just about any hardwear sotre or autoparts store. You can also get them here
http://evomoto.com/index.php?cPath=3...d2d5316c2be26e for $14.95 for a 10 pack.

I get all mine from here.
http://autobodysupplies.safeshopper..../cat14.htm?599

BTW, I used Part#2125T for the airbox snorkel.

That poppet fastner is not the correct fastner for the snorkel.

Yours aren't the right ones either, but Mitsu doesn't even make or sell the right ones anymore. I personally have never found the exact ones that came stock on my snorkel, so all my replacements ones have a screw like yours and like the ones linked above. I tried for a while to get the correct push-button ones, but Mitsu parts kept saying they no longer have them.

The stock ones were superseded to these.

The original stock ones were a push pin design. The screw type are much nicer b/c you never loose that damn pin by pushing it in too hard.. I must have had 3 of them sitting right next to the intercooler, on top of the air damper.

Much better price from the site you gave me Evo8. But i don't think i need 25 of them. I'll try the hardware store first and see if i can just get one or a smaller pack of 3 or something. I just want something holding it down.. i feel a little uncomfortable with it the way it is now. As if it'll break off on me one day... haha

But you can just get one out of the trunk lining...there's 10 back there.

ooo yeah i'll take that and use it for the snorkle then and then get some knockoff from the hardware store for the trunk :D