Best Exhaust ???
 

Hi all,

Looking for a new exhaust for my Evo...Needs to be 3 inch + with no resonators (larger diameter the better) must not drop below 3 inch all the way through Preferably in titanium but stainless is ok..

Mines VX Pro II 90mm is at the top of my list so far but always open to suggestions....

Ideally i would like a 3.5 inch turbo back system that will bolt up to an AMS GT35R kit...

What does anyone recommend ?

Phil

i think horsepower freaks has a 3.5 inch if you wana go bigger

myself i run an AMS TBE, 3inch and i love the way it sounds.

g.luck

Search, this topic has been discussed at least a few times a week. Just find a decent full 3inch exhaust, that doesn't neck down. You're pretty much paying for the name/material

If you want a 3" titanium turbo back exhaust.....good luck. As for a 3" stainless there are a ton out there. If you just type in "Exhaust" in search I bet 47,932 threads pop up. I am pretty sure this thread should be closed before it gets ugly. Every exhaust thread seems to get ugly lately.

Were Scewed.

AMS TBE. I've gotten nothing but compliments on the sound.

:banghead: not another one of these:banghead:

Open downpipe:D

Sorry lads close it if you want....

3 inch titanium exhausts are easy to get but i am looking for more than 3inch titanium and the only one i can find is the Mines VX Pro II which is 90mm....My question is it any good ? Seems to have the diameter on its side but has a fair few bends...Would i be better goign for the HPF Goliath 3.5inch system and its straighter but heavier ? or an APS 3.5 turbo back ?

I would like one from the turbo back (that will fit an AMS GT35R KIT)

Whats the largest diameter, straighest exhaust on the market today ????

HPF 3.5, i have the catback it weighs 26lb fasteners included.

So APS or HPF are looking like the two best ? Anyone have any idea if the turbo back systems from these two manufaturers will fit an AMS GT35R turbo kit ?

here's a thread about the mines exhaust:

https://www.evolutionm.net/forums/sh...ighlight=mines

very beautiful exhaust

http://www.youtube.com/watch?v=py228S2C0h4

Check out the video of mine.

The Mines system looks fantastic just worried about the amount of bends in it compared to say the HPF Goliath...

Does any one have any better/bigger pics of the Mines system ? Also are there any restrictions in it ?

The AMS stytem sounds fantastic but i already have a 3 inch system on the car just fancied something a bit more meaty...

Apexi N1 exhaust is the ****.