what exhaust should i get?
hey guys i'm new to this site and let me tell you it is a great site. i just have one question what exhaust performs the best on a 2.4l gts mt? i know of a few like rrm and greddy but i want to weigh all my options. any feedback would be great thanks:)
|
Get the Power Agency or HKS. The HKS is a bit loud though.
|
are they cat backs? ar axle backs?
|
I have the same car and just got an RRM axleback, its in transit to me now, i will try and do a review/video when I get it installed next week
|
i have HKS its not loud really at all..
|
what are some of the louder exhausts out there? i don't know if i like the rrm axleback's sound.
|
Yeah, almost everyone I've seen on here that has the HKS say it sounds almost stock.
I think just about every exhaust (except the Injen SES) for the 08+ Lancer is an axle-back. I guess the stock exhaust piping is already 2.25" and with minimal bends, so there's no need for a cat-back. The most restrictive piece is the muffler and the cat(s). There are plenty of videos of exhaust on youtube, just search "08 Lancer Exhaust" or something similar. Although I wouldn't base your idea too strongly from videos on youtube due to compressed audio, and the quality of the camera that initially recorded the video can make it sound much different than it really is. My recommendation if you want one of the best performing, nice and loud exhaust; would be the WORKS axle back. It doesn't have a muffler so it's the lightest (if that matters) and probably the loudest aftermarket exhaust available (not including custom Axle-backs with universals). http://www.worksevo.com/store/produc...roducts_id=481 |
stock piping is 2" id
|
there's also the magnaflow cat back which is less then the injen. There are sound clips on their website, however the installation requires you to cut the stock exhaust after the cat.
|
Originally Posted by cRc`22
(Post 6358164)
stock piping is 2" id
|
HKS sounds stock. BARELY noticeable difference. Looks good tho
|
what is the website that the works' exhaust is on?
|
if u have the money and want a catback though i say get the magna flow catback, they usually have that nice deep tone, and its also loud, but not too loud, if i had the money, i would get that
|
Originally Posted by cr450f
(Post 6360152)
what is the website that the works' exhaust is on?
|
I posted the link earlier lol.
Ah, I was told by my local exhaust shop that it was 2.25" when I had them check it out to see what they could do. Could be wrong though, I've never seen anything official that says what size it is. |
All times are GMT -7. The time now is 01:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands