Wife's "new" Evo IV
 

new to the evo scene but both of us have always wanted one. we just picked it up today. fun car. got a better boost gauge and wideband on the way since there wasnt one. previous owner says there are injectors and an exhaust. gonna tear into it to see if theres anything else. i want to pick up something to adjust fuel for some minor tuning but i have no idea what to use on mistu's. never had one. or should i just pick up an ecu from a later model? also gonna check to see what kind of fuel pump is in there and throw a wally in if its not there already. im not a noob to modding fyi...had a big turbo srt4 and got a fully built aristo (2jz) here...(i love being over seas http://images.ibsrv.net/ibsrv/res/sr...es/biggrin.gif )

also on another note, would an evo 7/8/9 turbo bolt right up? or would i have to use the exhaust manifold, etc. just wanna get some basic mods in there for a little more fun. thx for the help in advance and ill post up some pics in a bit http://images.ibsrv.net/ibsrv/res/sr...e_thumbsup.gif

is that evo 4 a mirage conversion, or an imported one? i would love to see pix

i would like to see pix as well :)

Its down at the moment with a bad coil. Was sparking through to the valve cover causing a misfire. Have some on order and ill take some pics when its back up.

Oh yeah. And its a real CN9A :)

:worthless

word

just because its down doesnt mean you cant take pics of this beautiful machine, down or not; PIX!!! on that note, post some pix of your Aristo 2jz... also a beast worthy of showing off.

Sounds good. I hope to see pics later.

Lol. The evo is in our messy garage and ill have to answer to my wife if i take pics in there. Ill throw a couple of my aristo up though for now lol.

Dont mind the plate. that was the day i got it...also, the front is lower now.
mod list -
Sound performance(USA) CAST manifold
Garrett gt4084 . 68ar turbo
HKS 40mm wastegate
Fully rebuilt ported head
Modified Cams
HKS 1.6MM Head Gaskets
ARP head bolts
Forged CP 86.5mm pistons
New Stock Toyota Rods and bolts
ACL racing bearings
New Toyota oil pump
All new seals during full rebuild of engine
New VVTI unit
New Greddy timing belts
Toyota aux belts
Toyota Radiator
2.5 inch custom FMIC
2.5 inch custom alloy pipe work
16 row Thermostatic fan activated external gearbox cooler
10 row power steering cooler
Walbro 255 fuel pump
650cc Siemans dekka injectors
PHR Hi-Flow top feed fuel rail
Aeromotive FPR
HKS BOV
New VVTI igniter pack
New VVTI MAF sensor
New stock 02 SENSOR
Custom 3 inch intake pipe
3 inch air-filter
3 inch custom Down pipe
3 inch Custom mid pipe
Greddy EVO Stainless steel twin exit exhaust system
Lexus GS400 big brake Conversion – 4 pot front / 2 pots rear
Drilled / Grooved DAB disks
Stainless steel brake lines
Greddy delimiter
AEM FIC ECU
AEM wideband
Blitz boost controller
BC racing coilovers RS series
20 inch MMR triple chrome alloy wheels
275 *30 *20 falkan tyres rear
245 *30 * 20 falkan tyres front


http://i359.photobucket.com/albums/o...w/IMG_0182.jpg

http://i359.photobucket.com/albums/o...w/IMG_0181.jpg

http://i359.photobucket.com/albums/o...w/IMG_0180.jpg

http://i359.photobucket.com/albums/o...w/SANY0323.jpg

here is one that was taken when we picked it up. the wing is now gone.
http://i359.photobucket.com/albums/oo34/dubsnow/evo.jpg

Very nice looking aristo. I do want.

Thx. Plan on getting rid of the chrome for some gt-c's down the road.

where over seas where you? im assuming military?

Wife is. We are in germany atm.

sorry for being so curious but i cant help but to notice that those are united kingdom plates, and not germany's.

its across the north sea. with some few hundred miles in between. how did you go over there and export, then export again (thru Belgium or Netherlands) then import those cars???


im military too and i need to know how you guys do it because everybody else over here in Nuremberg cant figure it out.

hey where in germany? maybe we can meet?