EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   EvoM New Member / FAQs / EvoM Rules (https://www.evolutionm.net/forums/evom-new-member-faqs-evom-rules-61/)
-   -   New Member from MA (https://www.evolutionm.net/forums/evom-new-member-faqs-evom-rules/739594-new-member-ma.html)

Whiteout506 Apr 27, 2017 08:22 PM

New Member from MA
 
I've been lurking the classifieds for parts over the past few days, but I figured I'd make an introduction. I picked up my 2014 RA a couple weeks ago (would've been an X GSR, but my other half can't drive stick and decent MR's are seemingly non-existent in New England) and have been chomping at the bit to start modding. Other than the BOV and EBCS, any recommendations for starting mods? I'm coming from the 86 platform, so this is pretty much uncharted territory for me.
https://cimg8.ibsrv.net/gimg/www.evo...a33ebe8530.jpg

MinusPrevious Apr 28, 2017 06:05 AM


Originally Posted by Whiteout506 (Post 11734163)
I've been lurking the classifieds for parts over the past few days, but I figured I'd make an introduction. I picked up my 2014 RA a couple weeks ago (would've been an X GSR, but my other half can't drive stick and decent MR's are seemingly non-existent in New England) and have been chomping at the bit to start modding. Other than the BOV and EBCS, any recommendations for starting mods? I'm coming from the 86 platform, so this is pretty much uncharted territory for me.

Welcome aboard & congrats on the RA. Looks super clean. As far as mods, be great to get this RA on some susp springs (Swifts / GTworx or even some Eibachs). CAT back exhaust also

Stay active on the forum & dont be shy about posting up{thumbup}

Joe

Whiteout506 Apr 29, 2017 01:11 PM


Originally Posted by MinusPrevious (Post 11734213)
Welcome aboard & congrats on the RA. Looks super clean. As far as mods, be great to get this RA on some susp springs (Swifts / GTworx or even some Eibachs). CAT back exhaust also

Stay active on the forum & dont be shy about posting up{thumbup}

Joe

Unfortunately the headlights are a mess (aftermarket HID kit by the looks of it), and between the ballasts and how it looks like some stuff was done (ballasts mounted with 3m velcro tape, and scotch tape on top of sealant between the plastic cover and the back housing), I'm not sure if it would just be easier to scrap them and order a new halogen set than try to fix it.

It's surprisingly clean other than that!

BoV/EBCS/AP3 should be on the way this week, though, so yay power!


All times are GMT -7. The time now is 10:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands