HELP ASAP! Broke Clamp that Connects Intake tube to MAF!!!
#1
Evolving Member
Thread Starter
iTrader: (14)
Join Date: Feb 2007
Location: Skiatook, OK
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
HELP ASAP! Broke Clamp that Connects Intake tube to MAF!!!
Hey guys,
Just installed my Vibrant Cone Filter and MAF adaptor and was re-tightening the stock clamp that connects the intake hose coming off the turbo to the maf and broke the clamp where the hose connects to the MAF. Obviously I wanna REPLACE ASAP to prevent boost leaks..would you reccomend a good "T-Clamp" from autozone instead of the usual cheapo C-Clamps and if so is it...3", 3.5", or 4" ? Thanks for your timely help!
Just installed my Vibrant Cone Filter and MAF adaptor and was re-tightening the stock clamp that connects the intake hose coming off the turbo to the maf and broke the clamp where the hose connects to the MAF. Obviously I wanna REPLACE ASAP to prevent boost leaks..would you reccomend a good "T-Clamp" from autozone instead of the usual cheapo C-Clamps and if so is it...3", 3.5", or 4" ? Thanks for your timely help!
#2
Evolving Member
im no expert but i don't think the intake tube going to the turbo intake side will leak boost. yes autozone s should have a clamp to fix it. from my understanding the clamps on the intake side can be ordinary hose clamps their isn't any boost pressure their.
my .02
my .02
Thread
Thread Starter
Forum
Replies
Last Post
W0LF
For Sale/WTB - Engine / Drivetrain / Power
1
Jan 14, 2016 03:34 PM
FS[West]: Sakura 3" Intake $250 Shipped
IbeBOOSTIN
For Sale - Engine / Drivetrain / Power
1
Nov 2, 2015 07:30 PM
FS[Pacific NW]: 02 Housing, Intake, Stock Parts, 9 MAF
TeachersEvo
For Sale/WTB - Engine / Drivetrain / Power
17
Aug 21, 2015 07:06 AM
Boost3dxEvO
For Sale - Part Outs
29
Jun 28, 2008 11:16 PM
bigjhoney
For Sale/WTB - Engine / Drivetrain / Power
8
Jun 27, 2005 02:22 PM