BlackTop Aero EVO X Carbon Fiber Front Lip - Varis Style
Jan 14, 2009, 12:24 PM
#1
Former Sponsor
Thread Starter
iTrader: (80)
Join Date: Mar 2003
Location: NY
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
BlackTop Aero EVO X Carbon Fiber Front Lip - Varis Style
BTAero Type VR Front Lip revised to Fit US EVO X.
$399.00 + $120 Shipping
IN STOCK NOW ---- Nov, 17, 2011
Thank you.
$399.00 + $120 Shipping
IN STOCK NOW ---- Nov, 17, 2011
Thank you.
Last edited by RavSpec; Jun 4, 2012 at 11:20 AM.
![[Neo]'s Avatar](https://www.evolutionm.net/forums/customavatars/avatar45156_1.gif){kind=avatar}
Jan 14, 2009, 06:52 PM
#3
Former Sponsor
Thread Starter
iTrader: (80)
Join Date: Mar 2003
Location: NY
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Look similar but not the same. We have to revised quite a few parts on the lip to make it fit US bumpers.
Notice on the Rexspeed pictures, the black grill wasn't install. That's a major issue because the lip will not sit flush without some extensive modification.
The original Varis lip doesn't fit on USDM bumper because of the same reason.
We have since make the necessary modification and now it's perfect fit on US bumper.
We will have 20 pieces, revised to fit US Spec bumpers.
Notice on the Rexspeed pictures, the black grill wasn't install. That's a major issue because the lip will not sit flush without some extensive modification.
The original Varis lip doesn't fit on USDM bumper because of the same reason.
We have since make the necessary modification and now it's perfect fit on US bumper.
We will have 20 pieces, revised to fit US Spec bumpers.
Jan 15, 2009, 03:37 PM
#4
Evolving Member
iTrader: (2)
Join Date: Nov 2008
Location: pa
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Look similar but not the same. We have to revised quite a few parts on the lip to make it fit US bumpers.
Notice on the Rexspeed pictures, the black grill wasn't install. That's a major issue because the lip will not sit flush without some extensive modification.
The original Varis lip doesn't fit on USDM bumper because of the same reason.
We have since make the necessary modification and now it's perfect fit on US bumper.
We will have 20 pieces, revised to fit US Spec bumpers.
Notice on the Rexspeed pictures, the black grill wasn't install. That's a major issue because the lip will not sit flush without some extensive modification.
The original Varis lip doesn't fit on USDM bumper because of the same reason.
We have since make the necessary modification and now it's perfect fit on US bumper.
We will have 20 pieces, revised to fit US Spec bumpers.
this is made by carbon fiber, right?what weave?
Last edited by morfhious3; Jan 15, 2009 at 03:39 PM. Reason: additional message
Trending Topics
Jan 15, 2009, 07:31 PM
#10
Former Sponsor
Thread Starter
iTrader: (80)
Join Date: Mar 2003
Location: NY
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
The grill section has a slight differences in the angle, bend differently. The original Varis lip required extensive modification before it can be install in US EVOX.
Jan 15, 2009, 07:40 PM
#12
Former Sponsor
Thread Starter
iTrader: (80)
Join Date: Mar 2003
Location: NY
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
if you look at the Rexpeed post, the EVO X lip were installed on a bumper without the grill (black piece). Because of the grill, the lip doesn't sit flush. Extensive modification to the lip to clear the grill are required.
That's what happen to the first sample lip we have. Since then, we have make the necessary modification to our mold and now all our lips will be revised to clear the grill. We only test them on the US EVO X, haven't get a chance to test on the JDM EVO X yet.
We have a chance to look at the JUN lip , which has a similar problem, but on the JUN version, the grill section has a different bend so it clear the grill area only slightly touches the lip, thus not alot of modification are required.
The Varis version has a totally different bend which required extension modification to the grill section before it can be install.
Our lip which was a revised VARIS lip will clear the grill w/o any modification. That's why we have a few weeks delays for the first shipment of the lip.
That's what happen to the first sample lip we have. Since then, we have make the necessary modification to our mold and now all our lips will be revised to clear the grill. We only test them on the US EVO X, haven't get a chance to test on the JDM EVO X yet.
We have a chance to look at the JUN lip , which has a similar problem, but on the JUN version, the grill section has a different bend so it clear the grill area only slightly touches the lip, thus not alot of modification are required.
The Varis version has a totally different bend which required extension modification to the grill section before it can be install.
Our lip which was a revised VARIS lip will clear the grill w/o any modification. That's why we have a few weeks delays for the first shipment of the lip.
