My ETS Tubular Ball Bearing 58 Trim Turbo Kit...Installed w/Pics...
Mar 23, 2008, 11:25 PM
#1
My ETS Tubular Ball Bearing 58 Trim Turbo Kit...Installed w/Pics...
Update...5-23-08
Just got finished installing the AEM EMS with a 3.5bar MAP sensor today (eliminating the MAF...leaving the AMS VSR next on the list to install with some much needed headwork
) and after a few chats with my tutor (WOT/Aby) over the phone, a good baseline map, lots of self tuning and some dyno time the results are in on 91 oct! Stay tuned for some MS 109 action 
________________________________________
Update....5-20-08
Some goodies JUST CAME IN.....stay tuned!
AMS VSR w/75mm TB and a AEM EMS 1313
________________________________________
Out with the old....FP Green....
In with the new
Just got finished installing the AEM EMS with a 3.5bar MAP sensor today (eliminating the MAF...leaving the AMS VSR next on the list to install with some much needed headwork
) and after a few chats with my tutor (WOT/Aby) over the phone, a good baseline map, lots of self tuning and some dyno time the results are in on 91 oct! Stay tuned for some MS 109 action ________________________________________
Update....5-20-08
Some goodies JUST CAME IN.....stay tuned!
AMS VSR w/75mm TB and a AEM EMS 1313
________________________________________
Out with the old....FP Green....
In with the new
Last edited by alan678; May 23, 2008 at 11:44 PM.
Looks great. Trending Topics
Mar 27, 2008, 04:34 PM
#13
Evolving Member
iTrader: (5)
Join Date: Dec 2003
Location: Simi Valley, CA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
^ Show 286, get a thread up with a graph as soon as you get that kit in and tuned that's the exact setup I plan on getting soon! Did you go with the .63 a/r housing on the hta 3076?
Alan, very nice pics and a beautiful kit to say the least! 58trim turbo is some serious business! What does the 58 trim flow do you know? The hta is supposed to flow 57lbs/min the 58 should be pretty close i'd think...
Alan, very nice pics and a beautiful kit to say the least! 58trim turbo is some serious business! What does the 58 trim flow do you know? The hta is supposed to flow 57lbs/min the 58 should be pretty close i'd think...
Last edited by OZrallyracer; Mar 27, 2008 at 04:36 PM.
Mar 27, 2008, 04:54 PM
#14
Evolving Member
iTrader: (8)
Join Date: Jan 2007
Location: Bel Air,MD
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
^ Show 286, get a thread up with a graph as soon as you get that kit in and tuned that's the exact setup I plan on getting soon! Did you go with the .63 a/r housing on the hta 3076?
Alan, very nice pics and a beautiful kit to say the least! 58trim turbo is some serious business! What does the 58 trim flow do you know? The hta is supposed to flow 57lbs/min the 58 should be pretty close i'd think...
Alan, very nice pics and a beautiful kit to say the least! 58trim turbo is some serious business! What does the 58 trim flow do you know? The hta is supposed to flow 57lbs/min the 58 should be pretty close i'd think...
Mar 28, 2008, 10:43 AM
#15
^ Show 286, get a thread up with a graph as soon as you get that kit in and tuned that's the exact setup I plan on getting soon! Did you go with the .63 a/r housing on the hta 3076?
Alan, very nice pics and a beautiful kit to say the least! 58trim turbo is some serious business! What does the 58 trim flow do you know? The hta is supposed to flow 57lbs/min the 58 should be pretty close i'd think...
Alan, very nice pics and a beautiful kit to say the least! 58trim turbo is some serious business! What does the 58 trim flow do you know? The hta is supposed to flow 57lbs/min the 58 should be pretty close i'd think...
The 58mm is actually a 60-trim and is rated to flow 58lbs./min. It's a beast!
Tom