Notices
General Engine Management / Tuning Forum Discuss general EMS tuning concepts that do not pertain to a specfic brand or product.

Where should I start..

Thread Tools
 
Search this Thread
 
Old May 7, 2014 | 01:19 PM
  #1  
trentan's Avatar
Thread Starter
Newbie
 
Joined: Oct 2011
Posts: 13
Likes: 0
From: wisconsin
Where should I start..

I have a 2005 Evo 8 which i just bought. Two thousand miles ago the motor was completely rebuilt. Right now the car cruises just fine with normal AFR's but when boost rolls in the AFR's shoot down to 10.0 so I'm assuming it is even lower because that's as low as the gauge goes. Once the car is warm it tends to idle pretty bad as you can see fro the YouTube video. Attached I have a picture of the codes it is throwing as well as the engine bay. I threw in the engine bay pic because I feel like the MAF could have been damaged by the crappy filter. Any suggestions are appreciated as I am trying to bring this baby back to life. Thank you.

Attached Thumbnails Where should I start..-image-3-.jpg   Where should I start..-image-4-.jpg  
Reply
Old May 8, 2014 | 07:19 AM
  #2  
epiphanysfi's Avatar
Newbie
 
Joined: Jul 2013
Posts: 45
Likes: 0
From: Arizona
I would start with your MAF. The factory service manual has a good explanation about checking your temperature unit for "intake air temperature sensor check."

Also check the "volume air flow sensor check."
Corresponds to your P0102
• Volume airflow sensor failed.
• Open or shorted volume airflow sensor circuit,
harness damage or connector damage.
• ECM failed.
Reply
Old May 9, 2014 | 06:03 AM
  #3  
superkizuna's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jan 2012
Posts: 546
Likes: 3
From: washington dc
Man, that is a laundry list of codes bro. Do you have a logger?
Reply
Old May 9, 2014 | 03:27 PM
  #4  
trentan's Avatar
Thread Starter
Newbie
 
Joined: Oct 2011
Posts: 13
Likes: 0
From: wisconsin
Originally Posted by epiphanysfi
I would start with your MAF. The factory service manual has a good explanation about checking your temperature unit for "intake air temperature sensor check."

Also check the "volume air flow sensor check."
Corresponds to your P0102
• Volume airflow sensor failed.
• Open or shorted volume airflow sensor circuit,
harness damage or connector damage.
• ECM failed.
I will have to find how to check the temperature unit online or something because they did not include a manual with the sale. I cleaned the MAF but go figure, it didn't fix anything. After I cleaned it I forgot to plug it in and it ran like absolute crap. Does that mean it is not the problem or could it still be just functioning poorly? I am currently out of town and will be back with the car on Thursday so that's when i can do some more diagnostics. Thanks for your help.
Reply
Old May 9, 2014 | 03:32 PM
  #5  
trentan's Avatar
Thread Starter
Newbie
 
Joined: Oct 2011
Posts: 13
Likes: 0
From: wisconsin
Originally Posted by superkizuna
Man, that is a laundry list of codes bro. Do you have a logger?
Yeah I'm not very happy about it. The guy who I bought it from told me only the 02 sensor was bad and that's the only code that went off. The car had no CEL when I bought it so I regretfully took his word for it. I guess this is what i get for not thoroughly looking at the car. I do not have a logger nor do i really know what that is/how it works because I'm quite new to this. I am interested in learning all of this so in the meantime ill do a little more research I guess.
Reply
Old May 10, 2014 | 07:36 AM
  #6  
superkizuna's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jan 2012
Posts: 546
Likes: 3
From: washington dc
Originally Posted by trentan
I have a 2005 Evo 8 which i just bought. Two thousand miles ago the motor was completely rebuilt. Right now the car cruises just fine with normal AFR's but when boost rolls in the AFR's shoot down to 10.0 so I'm assuming it is even lower because that's as low as the gauge goes. Once the car is warm it tends to idle pretty bad as you can see fro the YouTube video. Attached I have a picture of the codes it is throwing as well as the engine bay. I threw in the engine bay pic because I feel like the MAF could have been damaged by the crappy filter. Any suggestions are appreciated as I am trying to bring this baby back to life. Thank you.

Need help with Evo 8 - YouTube
Okay I just looked at your video. 2 things-- it looks like you are idling very rich but I don't think that's what the problem is. It sounds like something is resonating. I bet it's something that's not bolted tight. Sorry bro, I know there's a million bolts in the Evo but ......
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Alchem1st
Evo Show / Shine
394
Mar 12, 2018 03:37 AM
necno3
Evo X Engine / Turbo / Drivetrain
3
Aug 24, 2016 06:33 AM
Mauricio Evo IV
Evo General
9
Dec 30, 2015 02:32 PM
dxlykos0131
Evo Engine / Turbo / Drivetrain
8
Dec 8, 2013 07:59 PM




All times are GMT -7. The time now is 04:38 AM.