EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   General Engine Management / Tuning Forum (https://www.evolutionm.net/forums/general-engine-management-tuning-forum-129/)
-   -   ECU+ and Evo IX (https://www.evolutionm.net/forums/general-engine-management-tuning-forum/166875-ecu-evo-ix.html)

Kronik Oct 30, 2005 01:17 PM

ECU+ and Evo IX
 
It saddens me to ask this question but will the ECU+ work with the IX and it's variable timing?

Just yesterday I was in a really bad wreck with my Evo VIII -- someone cut across my lane to merge onto an interstate and smashed into the front of my car. Initial estimates are over 15K for repairs, so the car may be totaled :(

I currently have the black box version so I was looking for some information.

Thanks

spooledevo Oct 30, 2005 01:25 PM

Sorry to here about your car. hope everyone is ok. I will take the ecu+ off your hands if you need to get rid of it... Bruce

tlcoll1 Oct 30, 2005 03:29 PM


Originally Posted by Kronik
It saddens me to ask this question but will the ECU+ work with the IX and it's variable timing?

The answer is: I can't swear to it until I see an IX, but I expect it'll work fine. The MIVEC heads really shouldn't affect anything that the ECU+ does, and since the IX is the end of the line for the current EVO setup, chances are that Mitsu has left the stock ECU largely alone.


Just yesterday I was in a really bad wreck with my Evo VIII -- someone cut across my lane to merge onto an interstate and smashed into the front of my car. Initial estimates are over 15K for repairs, so the car may be totaled :(
Sorry to hear that. Sounds like you are ok, which is what really matters.

Tom

G20 Oct 30, 2005 09:28 PM

One thing will not work is the Plug-and-play harness will not fit to the IX ECU so you will have to do the wiring.

tlcoll1 Oct 30, 2005 09:37 PM


Originally Posted by G20
One thing will not work is the Plug-and-play harness will not fit to the IX ECU so you will have to do the wiring.

Really? How do you know?

Tom

G20 Oct 30, 2005 09:58 PM

I saw the IX ECU connector from a friend EVO IX when we were trying to see his previous EVO 8 hardness will fit. It's only from the observation point since we did not try to plug it in because of the different.

tlcoll1 Oct 30, 2005 10:04 PM


Originally Posted by G20
I saw the IX ECU connector from a friend EVO IX when we were trying to see his previous EVO 8 hardness will fit. It's only from the observation point since we did not try to plug it in because of the different.

Hmmm. Not good news for me! Looks like I have some work to do to get the thing working on the IX. Thanks for the info.

Tom

GDB Oct 31, 2005 12:37 AM

Tom, from what I know (which is unconfirmed) the USDM Evo 8's use 2 row ECU connector, correct? Which is the same as JDM Evo 7. Whereas the Evo 9 uses 3 row connector, which I *suspect* is same to JDM Evo 8.

Not that it may help :p it's just that I have JDM Evo 8, planning to use ECU+, so chances are I'll wait until there's Evo 9 (3 row) plug-and-play connector.

Assuming there's NO COMPATIBILITY issues between 8 and 9 ECUs...

Kronik Oct 31, 2005 06:38 AM

Yeah we are ok -- just banged up. Soon as I find out more about what is going to happen I'll let you all know... thanks.

evo8dad Oct 31, 2005 06:44 AM

Kronik - FYI - The insurance industry will only total your car if the damages are equal to or more than 80% of the fair market value of your car.

Ev0ikon Oct 31, 2005 06:52 AM

I thought it's 50% of the bluebook to get it totaled.
And it's a good thing no person got hurt.
I would liek to know how the IX support turn out too Tom.

EvilDylan Oct 31, 2005 07:02 AM


Originally Posted by Ev0ikon
I thought it's 50% of the bluebook to get it totaled.
And it's a good thing no person got hurt.
I would liek to know how the IX support turn out too Tom.

If you get a IX alan, ill be pissed. LOL

Ev0ikon Oct 31, 2005 07:07 AM


Originally Posted by EvilDylan
If you get a IX alan, ill be pissed. LOL

Nah. I have a friend in Chicago that jsut got one. Are you thinking of trading in too? :P :lol:

EvilDylan Oct 31, 2005 01:38 PM

haha no way i could afford a 9, i got my 8 at probably the lowest possible price.

tlcoll1 Oct 31, 2005 03:51 PM


Originally Posted by GDB
Tom, from what I know (which is unconfirmed) the USDM Evo 8's use 2 row ECU connector, correct? Which is the same as JDM Evo 7. Whereas the Evo 9 uses 3 row connector, which I *suspect* is same to JDM Evo 8.

Not that it may help :p it's just that I have JDM Evo 8, planning to use ECU+, so chances are I'll wait until there's Evo 9 (3 row) plug-and-play connector.

Thanks for the info. I guess I'll have to see how long it takes some of the harness manufacturers to come up with something for the IX - 'till then, I guess no ECU+ for the IX.

Tom


All times are GMT -7. The time now is 11:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands