|
Has anyone seen the new Motec plug-in ECU for Evo's?
Check this out!! Direct plug-in for the Evo's harness! I heard it is only available for the Evo IX, but Motec's website says available for the Evo's 4-7, and US Spec. Evo 8 is in production.
Check it: http://www.motec.com/products/kits/kits.htm |
it fits in the stock location. don't know if it is worth the extra bucks but it is a nice feature.
|
im running one in my car, let me know if you are interested in purchasing one.
|
Originally Posted by EFIxMR
im running one in my car, let me know if you are interested in purchasing one.
|
what i was told by an authorized MoTeC dealer for the US is that the non-US ecus are different & so they have had trouble with the US version. it would be easier to get the standalone units that they sell.
|
at most you would need to swap some pin locations. i dont think your source is thinking out of the box. i do a lot of custom efi solutions, where sometimes we use ecu's from different generation engines to older generation cars, something like this is a cake walk.
plus people have installed AEM's on non us Evolution 7's, people have even run the EVO's on DSM ecus. This is not an insurmountable problem to people who specialize in this field. http://www.speedelement.com/forsale/goldpnpharness.JPG here is a custom pnp harness i made for my M800 universal ECU. http://www.speedelement.com/forsale/adloem.JPG rest assured i did not buy this stuff to have it not work. |
Originally Posted by EFIxMR
at most you would need to swap some pin locations. i dont think your source is thinking out of the box. i do a lot of custom efi solutions, where sometimes we use ecu's from different generation engines to older generation cars, something like this is a cake walk.
plus people have installed AEM's on non us Evolution 7's, people have even run the EVO's on DSM ecus. This is not an insurmountable problem to people who specialize in this field. http://www.speedelement.com/forsale/goldpnpharness.JPG here is a custom pnp harness i made for my M800 universal ECU. http://www.speedelement.com/forsale/adloem.JPG rest assured i did not buy this stuff to have it not work. your setup is very nice & clean though. how much power have u made with the motec by itself??? |
the lower picture is of an EVO 8 pnp unit. It was configured to my USDM EVO 8 from motec austrialia.
i tuned the m800 to 604 whp on my racecar. no current numbers on my EVO 8 just yet. still in the process of picking up all the parts. |
Originally Posted by EFIxMR
the lower picture is of an EVO 8 pnp unit. It was configured to my USDM EVO 8 from motec austrialia.
|
tuning motec is about the same difficulty as tuning an AEM. but to set it up properly (configuring sensors/outputs and making from scratch a basemap) is what really requires technical expertise.
lucky for you the pnp is preconfigured and comes with a basemap for the EVO. let me make a few phone calls and see whats the current price. |
Originally Posted by EFIxMR
tuning motec is about the same difficulty as tuning an AEM. but to set it up properly (configuring sensors/outputs and making from scratch a basemap) is what really requires technical expertise.
lucky for you the pnp is preconfigured and comes with a basemap for the EVO. let me make a few phone calls and see whats the current price. |
yea how much do they cost.
|
| All times are GMT -7. The time now is 10:10 AM. |
© 2026 MH Sub I, LLC dba Internet Brands