Rating Summary
Options
From
Date
GravityKnight
Dec 2, 2014, 09:09 AM
Clutch was said to be in perfect working condition, ready to drop in. Not even remotely accurate...
One of the discs had no material left on one side, effectively rendering it worthless. The Intermediate plate was shot (all but 1 tab busted off). The top plate was warped bad enough it can't be run (probably why the disc that ran against it was shot). You could put a straight edge on it and see 1/16" + of gap on one side. And to top it off, the cover turned out to not even be an HD model. Ran the part number and it's the SD cover. Contacted buyer multiple times.
He refunded me $150 of $850. So I paid $750 for a used flywheel, and 1 used disc.... everything else was completely ruined or the wrong part. I contacted him again after finding more damaged parts and sending pictures of the issues etc. He stopped responding. So after giving him plenty of time to make it right, I am now leaving bad feedback. I would have been far ahead money wise just buying a new HD at $1400. There is no excuse.
New disc $250
Intermediate plate $180
Top Plate that goes under cover $170
HD Cover $540
Because I couldn't afford to replace the cover and didn't actually find out it was the SD until I was in the middle of the install and needed a working car, I had to run it... now I have 100 ft lbs less torque capacity.... on a used clutch I spent more than a new one would have cost. I have all the conversations with the seller saved, and pictures showing all damage and the wrong cover etc.
One of the discs had no material left on one side, effectively rendering it worthless. The Intermediate plate was shot (all but 1 tab busted off). The top plate was warped bad enough it can't be run (probably why the disc that ran against it was shot). You could put a straight edge on it and see 1/16" + of gap on one side. And to top it off, the cover turned out to not even be an HD model. Ran the part number and it's the SD cover. Contacted buyer multiple times.
He refunded me $150 of $850. So I paid $750 for a used flywheel, and 1 used disc.... everything else was completely ruined or the wrong part. I contacted him again after finding more damaged parts and sending pictures of the issues etc. He stopped responding. So after giving him plenty of time to make it right, I am now leaving bad feedback. I would have been far ahead money wise just buying a new HD at $1400. There is no excuse.
New disc $250
Intermediate plate $180
Top Plate that goes under cover $170
HD Cover $540
Because I couldn't afford to replace the cover and didn't actually find out it was the SD until I was in the middle of the install and needed a working car, I had to run it... now I have 100 ft lbs less torque capacity.... on a used clutch I spent more than a new one would have cost. I have all the conversations with the seller saved, and pictures showing all damage and the wrong cover etc.