Demon_ni2 - the "Offical" Build Thread - the no holds bar build -[8UR EVO]-
Jun 15, 2010, 06:14 PM
#1
Demon_ni2 - the "Offical" Build Thread - the no holds bar build -[8UR EVO]-
FIRST VIDEO IS ON PAGE 11!
I started 'projekt evokilla' as a joke, plus to **** off some evo guys..
I will always bow to the awd abilities of the evo in the 300', but beyond that its fair game.
Not claiming to be able to beat any/all evos, this car is my fun toy, I've owned it for almost 10 years now.
I started 'projekt evokilla' as a joke, plus to **** off some evo guys..
I will always bow to the awd abilities of the evo in the 300', but beyond that its fair game.
Not claiming to be able to beat any/all evos, this car is my fun toy, I've owned it for almost 10 years now.
I have no real goals with this setup other then to have fun and to go faster then it ever has, it's not the best platforum to build, but its better then nothing, i should have gotten rid of it a long time ago, but its stuck around because i couldn't justify replaceing it with something i couldn't buy paid off.
"you're a lancer freak" - no sir im not.. this is my first car, ive owned it for 9 years now, no point in getting rid of it. I've had a new DD car for a while now, and my very nice new work truck also.
I dont want to roll in some over modified honda that every else has.. I stand out of EVERY crowd im in, i just think the lancer suites my personality pretty well.
Car will be running on e85 only. Will have a small nitrous setup on it also, but nothing to serious.
List of some stuff:
--------------------------------------------------------------
Turbo Setup:
Bullseye s300sx twinscroll 83/75 w/ .91ar
custom Top-mount twinscrol t4 manifold, built by EPM.
4'' side dump
2x tial mvs 38mm
PTE 1200cc
3inch custom intercooling
AEM FPR
AEM (evo8) FUEL Rail
CUSTOM Intake MANIFOLD -5'' D plenum 16'' long, 6'' runners
Boomba 75mm TB
-----------------------------------------------------------------
Motor:
9.5:1 ross forged and coated pistons
.20over, deck'd, honed, vacc'd
(new oilpump/waterpump/tensioner/timing kit)
pautar Rods
knife edged & balanced crank
arp headstuds
OEM headgasket
ACL race rod bearings
ACL main bearings
RPW stage2 cam
RPW stage4 cam 272/300 a few weeks after its running..
PortNpolished head (gasket matched)
3angle valve job
oversized intake valves
----------------------------------------------------------------------
TRANS: (STOCK)
*AUTOMATIC*
^nooo durr, its gunna break!, its lasted 120k miles, blown 3 motors, and its held in there..
(cant deside on if i wanna get a built auto, or build a 5spd with a custom gearset)
-------------------------------------------------------------------------
DRIVETRAIN:
whats a drivetrain? lol
LSD for starters
no sway bars
no radiator supports
no interrior (lol not related)
15x9 rims
26x8x15 slicks
rebuilt axles (doubt they will last)
Not really worried about traction, ive never had any in the past, so whats new right?
Alot of small accessories:
JEGS -AN fittings
Custom Breather Box
K&N intake filter, and breather box filters..
Jegs -8an and -12an black braded lines
OBX 5port vacume box
GodSpeed halfsize radiator(14x17x2)
Custom valve cover
All custom intercooling
mishimoto intercooler G-line (might upgrade)
Interiorr:
Kirkey full containment seat (driver)
kirkey intermediate race series seat (passenger)
custom hoop/hardness bar
g-force camlocks
evo8 gauge cluster
gutted interrior
no a/c or heater..
lexan side windows
gutted doors
greddy boost controller
boost/temp/egts gauges
----------------------------------------------------------------
(picture of car fully assembled, at import alliance fall meet) (still much more to come)
Any interest in my build or parts that are built can always be reproduced for other vehicles.
This new setup should be a killer! "Legit" whatever.. This is an Art, and not just for braggin rights.
Any questions about my car or parts we are building, just pm me.
Last edited by Demon_ni2; Nov 4, 2010 at 05:50 PM. Reason: word filter, 1 word edited out. :) & (changed page number of video)
The following users liked this post:
03_OZRally (Nov 21, 2020)
The following users liked this post:
03_OZRally (Nov 21, 2020)
The following users liked this post:
03_OZRally (Nov 21, 2020)
Jun 15, 2010, 06:59 PM
#5
Today was Paint/prep work day, but the WEATHER wasnt cooperating, so i didnt finish.
(no pics of the engine bay, cuz it was raining very hard)
ALSO,, I FREAKING HUGE TREE fell in my back yard) right when it started to rain
Will finish paint the engine bay tomorrow if the weather is decent.
(no pics of the engine bay, cuz it was raining very hard)
ALSO,, I FREAKING HUGE TREE fell in my back yard) right when it started to rain
Will finish paint the engine bay tomorrow if the weather is decent.
Trending Topics
Jun 16, 2010, 12:54 PM
#9
Evolving Member
iTrader: (13)
Join Date: Dec 2008
Location: Cincinnati/Atlanta
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
ha i thought this quote would fit you "These guys bad, but i gotta be a demon" - lil wayne
good luck with the build, u make me wanna get a bigger turbo, and custom fab a gnarley turbo mani
good luck with the build, u make me wanna get a bigger turbo, and custom fab a gnarley turbo mani
thx bignasty_yagn
Jun 16, 2010, 06:19 PM
#11
today i finished what i started (for the most part)
finished painting and clearcoating the engine bay.. i might do one more layer of clear tomorrow.. but i doubt it..
little bit of overspray on the cradle and swaybar, but nothing that i care about.
plans for tomorrow are to start messing with the wiring harness and clean up the trans so it doesnt look so nasty(might paint it also, havent decided, just depends on how much has to be done to it.. for the most part it will be completely covered, so u wont ever see it. its just nice to have clean parts to work around..
Friday/saturday are kinda big days. got a few coming in to help out. might knock out the interrior stuff that i have left to do.. and also paint and install the built motor..just waitin on the call to come pick up the motor now.
at my current rate, i could actually have everything ready to run by the following weekend, got a couple obsticles i need to tackle before that can happen, so we will see how this weekend goes
finished painting and clearcoating the engine bay.. i might do one more layer of clear tomorrow.. but i doubt it..
little bit of overspray on the cradle and swaybar, but nothing that i care about.
plans for tomorrow are to start messing with the wiring harness and clean up the trans so it doesnt look so nasty(might paint it also, havent decided, just depends on how much has to be done to it.. for the most part it will be completely covered, so u wont ever see it. its just nice to have clean parts to work around..
Friday/saturday are kinda big days. got a few coming in to help out. might knock out the interrior stuff that i have left to do.. and also paint and install the built motor..just waitin on the call to come pick up the motor now.
at my current rate, i could actually have everything ready to run by the following weekend, got a couple obsticles i need to tackle before that can happen, so we will see how this weekend goes
Last edited by Demon_ni2; Jun 16, 2010 at 07:25 PM.
The following users liked this post:
03_OZRally (Nov 21, 2020)
Jun 16, 2010, 07:37 PM
#13
the 2 or 3 different ways i can run it.. just arent that simple and alot of bends.. if i run it on a 90 over the valve cover to the passenger light and down to the intercooler its the simplest free flowing and not much longer. might not be exactly like that, we will be changin a few small things up that might add tons and tons more space to work with.
once the new setups in the car, it will be maken a weekend trip out to the shop again for the last few small changes.. and also to finish puttin her together.. yall might really like the last few modifications to the front clip. gotta just wait and see how the next couple weekends go first.
The following users liked this post:
03_OZRally (Nov 21, 2020)
Jun 17, 2010, 09:34 PM
#14
Ok. todays update, didnt do to much, but i did finish cleaning the engine bay, and i messed with the wiring harness for a little bit also.... doin my best to make it look pretty right now. only real things left to do is rewire the injectors, and run my fuel lines.
i need to mount my FPR and also my vacume box this weekend, just need to figure out where i want them.
will be working on the interrior tomorrow and saturday.. hopefully that will get completed if my buddy is able to help me out with making the seat brackets. just gotta wait and see how everything goes..
i need to mount my FPR and also my vacume box this weekend, just need to figure out where i want them.
will be working on the interrior tomorrow and saturday.. hopefully that will get completed if my buddy is able to help me out with making the seat brackets. just gotta wait and see how everything goes..
Last edited by Demon_ni2; Jun 17, 2010 at 09:40 PM.