EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Lancer Engine Management / Tuning Forums (https://www.evolutionm.net/forums/lancer-engine-management-tuning-forums-200/)
-   -   2016 Lancer GTS tuning (https://www.evolutionm.net/forums/lancer-engine-management-tuning-forums/741722-2016-lancer-gts-tuning.html)

BigWingThings Jul 10, 2017 12:05 PM

2016 Lancer GTS tuning
 
Hey all!

I am going to start off by saying I am new to tuning Lancers. What I am trying to do is tune my GF's 2016 Lancer GTS.

Its got the 2.4L 4b12 engine. I dont have the tables for it. Tried to open it many times in Ecuflash with no luck and done a lot of searching haha but finally made an account.

So just wondering what files i need to open the stock file in ECUflash?
I have the stock file, I got with the Tatrix cable.
and that gave me a "read_image.srf" file. And I cant do much with that yet...

Whats the next step?

Thanks in advance!

BigWingThings Jul 11, 2017 12:16 PM

Bump!

Even if someone could just lightly point me in the right direction that would also help me greatly!

greder Jul 30, 2017 04:59 AM


Originally Posted by BigWingThings (Post 11755729)
Hey all!

I am going to start off by saying I am new to tuning Lancers. What I am trying to do is tune my GF's 2016 Lancer GTS.

Its got the 2.4L 4b12 engine. I dont have the tables for it. Tried to open it many times in Ecuflash with no luck and done a lot of searching haha but finally made an account.

So just wondering what files i need to open the stock file in ECUflash?
I have the stock file, I got with the Tatrix cable.
and that gave me a "read_image.srf" file. And I cant do much with that yet...

Whats the next step?

Thanks in advance!



Put your firmware here!

jajk Sep 21, 2017 03:03 PM

Thread closed

greder Sep 23, 2017 12:46 PM


Originally Posted by jajk (Post 11773479)
Hey BigWingThings I have a 2013 Lancer VRX (Aus version of GTS) which I have successfully tuned with extremely good results. I had to define the main maps in the ROM myself. If you post your srf file (should be 1024kB in size), I can create a basic definition file to get you started.
Completely stock, tweaking the mivec intake and exhaust cams, ignition timing and AFR maps gives stunning results in both power and economy. Was going to do a few other mods but now I will keep my money in my pocket.

Please send me your stock firmware.

jajk Sep 23, 2017 02:01 PM

1 Attachment(s)
Thread closed

jajk Sep 24, 2017 12:01 AM

Thread closed

greder Sep 24, 2017 04:17 AM


Originally Posted by jajk (Post 11773873)
@greder What do you want this for?


I have in my car the stock of 2009, 53770004. I want to see the difference with the fresh ones.
On the engine in 2013, the MIveс is at the inlet only, or at the release too left?

jajk Sep 24, 2017 01:44 PM

Thread closed

greder Sep 25, 2017 12:05 PM

Hi jajk,
Thanks for the addresses, but I already found them and many others. You do not have the address of the table, the additive of ignition when the air conditioner is turned on?

jajk Sep 25, 2017 02:27 PM

Thread closed

jb988 Sep 25, 2017 03:24 PM

I'm in an 09 gts and would love learning to tune the rom. In my 03, I had a tactrix and I was learning but what are y'all using for the newer lancers to tune? New cables?

jajk Sep 25, 2017 04:36 PM

Thread closed

jb988 Sep 25, 2017 06:58 PM

Any way to link it from this lost

jajk Sep 25, 2017 09:47 PM

Thread closed


All times are GMT -7. The time now is 07:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands