timing belt
#1
Newbie
Thread Starter
Join Date: Apr 2008
Location: windsor,ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
timing belt
so i just did my timing belt and it wasn't to bad...it runs..lol
but what gets me is the tension spring the gates kit didnt come with and thought that if its not in the kit it was ok and the other thing is the belt is not where the old one was its more on the edge of the cs . are these thing going to be a problem
but what gets me is the tension spring the gates kit didnt come with and thought that if its not in the kit it was ok and the other thing is the belt is not where the old one was its more on the edge of the cs . are these thing going to be a problem
#3
Newbie
Thread Starter
Join Date: Apr 2008
Location: windsor,ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
but i remember that when i took it off it was on the front...because i remember trying to put it on the back but because its like a dish would not fit.
#4
Newbie
Thread Starter
Join Date: Apr 2008
Location: windsor,ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
well i took it all apart again and it still rides on the edge....after reading for hours everyone says to make the belt loose did that and nothing then i made it tight....nothing still on the edge. now i read that it might be the tension pulley or my water pump not running true or something like that.....damn you gates kit lol had high hopes for you.