the project was started today, pictures will be posted once the mold is done!!!! We are goin with the U.S. Spec 1, and possible goin to make it in the asian spec to for those would dont mind removing the front reinforcement.

john

 

if this is from accolade...screw it...nutting never came from dem in good condition....dey gave me a horrible hood...and never return mah calls or emails...

 

I don't really wanna have to grind my grill off...but what the hell.

Show me what you got John.

 

i will have my fiberglass guy take it off for those would wanan still have the stock hood. But i might have another kit made with the grill attached to the hood.

John

 

I can't wait to see pics!!!

 

me too

 

Pictures...now!!

 

How long do you think it'll be taking for the prototype to be finished, and you mentioned something about taking off the stock grill so that your kit will fit with our stock hoods. Can you give us a price estimation on the kit and how much it'd cost to shave off the grill?

 

what company is making these kits and so you are just the distributor right?

 

also, the hoods that come with the kit are evo 7 looking right? not normal oem for the lancer?

 

I really like the Idea of option 1....taking out the front reinforcement is not cool.....what if you get into a crash...but I'd go fot option 1....cars don't pass state inspection is PA with the front reinforcement taken out anyway.
as to everyones comments on making a lancer look like an evo....I say go for it, EVO's look bad ***...especially EVO 7's.....BUT if your going to make it look like an EVO...you better make it as fast as an EVO!!!!!!!!

 

I'm definitely interested in the spec 1, for sake of keeping the reinforcement bars. Can't wait to see pics, and hopefully it'll be close, especially the front end. Hoping to see that it's got that wide open grill, and VENTED slots above the engine block and intake.

And it looks like you're in a race w/ someone else to get the front end done! Wonder who will get it done first, and more importantly who will create the better product.

 

i need some pic, i need some pics, i need some pics hey hey hey hey!

 

slow down on the pics, guys. they just started fabrication, which will take a while. i definitely am interested in pics as well. i want to see how the new grill will be handled on the kit, but we just need to be patient. Keep us posted John.

 

depends who does the inspection. before my lancer i had a honda that was completely gutted and i live in carlisle pa. no front or rear supports no emissions stuff ran 13.8 in the 1/4 but as far as the lancer kits go i would want an evo 7 hood without the grill and put the grill on the bumper. basically an evo 7 conversion. not really into hacking off my stock grill but yeah. oh and where are you from in pa? if you need a distributer i work for creative cartunes in Mechanicsburg. And if any of you guys wanna see our work check out the august issue of super street for and article called thunderball. its about an s2000 that we did.