Under Corona's Hood
 

At the last Nathan's meet I was so friggin embarassed when Al asked to look under the hood. I was like uh.........sure.......bay was dirty and FUGLY! Well after cleaning the Engine bay and getting a Silicon Hose kit, and a new Cold air filter I decided to get to work.

Here are pics of my latest work.

The Headers are exposed because at the time the cover had wet primer and it was still in the garage drying.

Re: Under Corona's Hood
 

From a distance...and peep the headlights!

Re: Re: Under Corona's Hood
 

Much respect to RRM :headbang:
Although I got the silicon hoses courtesy of your local Auto Zone
That used to be a silver strut bar with the black vinyl RRM letters. I painted over it and peeled off the vinyl...and VIOLA! Silver RRM logo on Daytona Yellow Strur bar! :headbang:

looks like the radiator mounts are being painted too. looking good. you gonna do the valve cover?

Re: Re: Re: Under Corona's Hood
 

The cold air filter I bought had a 3" diameter. The stock unit on the Lancer is 4". So I went to the plumbing section of Home Depot and got a piece of sewer rubber that was 4" at one end and 3" at the other. Worked out for me because it acts like an adaptor but also pushes filter closer behind grill allowing it to get that ram of cold air at higer speeds.
That pinkish tint on the filter is K&N filter oil I sprayed on it to keep dry junk from getting into my internals.

Re: Re: Re: Re: Under Corona's Hood
 

Yup Radiator mounts and that thing that holds your battery in place. All that had yet to dry.
And I am leaving the valve cover silver.

As for those decals...Long F'ing story. I totally F'ed up the vinyl kit, now I am stuck with the front half until I get bored of it and rip that sh!t off. I got so mad when I accidentally ripped the vinyl.

wow how do you get your engine bay that clean???? :lol: anyway, i like that color scheme you got goin under there.. looks real good

Mike...Lookin good!!!! Take off the vinyl if u broke the other part to it

nice yellow scheme for under the hood

yellow = teh fastAr!
j/k man, looking nice, but i agree, take the decal off, or get the rest of it put on.

ECLC HOLLA'!
I used an engine degreaser, hosed ot down, dried it, then sprayed engine detailer. Covering fliter and electrical components of course. {thumbup}

I spent $40 on that vinyl! That ***** is staying on for at least a week! :rant:

lol, take the vynal off. cars coming along man.