Odd problem
#1
Newbie
Thread Starter
Join Date: Mar 2006
Location: KC MO
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Odd problem
For some reason when i push my brake the left turn signal indicator comes on. The light is not a bright as if i were to signal turning left and is more noticable at night (obviously). To add to that when i put the brake on and shift into reverse i have the same issue, however this time the light is brighter but yet not as bright as if i were to turn the left signal on. I thought a bulb maybe bad and haven't checked, but the dash indicator hasn't sped up any to indicated i have a turn signal light going out. Any clues as to what would cause this ??? I haven't added or removed anything recently that would warrant this. I have an 02 OZ rally edition 5 spd
thanks ahead...
thanks ahead...
#3
EvoM Staff Alumni
iTrader: (4)
Originally Posted by gregivq
It's definitaly some kind of electrical problem. Start going through some wires.
Ha ha you think!
It sounds like something is back feeding, the lancers are weird, if there is a short in one of your lights half the car will flash when the signals are on. I had this problem once.
#7
Evolved Member
iTrader: (5)
Join Date: Jul 2004
Location: Chicago
Posts: 2,387
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Danno
Ha ha you think!
It sounds like something is back feeding, the lancers are weird, if there is a short in one of your lights half the car will flash when the signals are on. I had this problem once.
It sounds like something is back feeding, the lancers are weird, if there is a short in one of your lights half the car will flash when the signals are on. I had this problem once.
::looks the other way with no respect::
Trending Topics
#8
Newbie
Thread Starter
Join Date: Mar 2006
Location: KC MO
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Turn out to be a bad ground to the taillight. This pin on the connector pushed out and it wasn't making a good connection so just hardwired the taillight to ground. problem fixed
#10
Evolving Member
Join Date: Feb 2005
Location: Brampton
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
I had this problem too. It happens like he said with the plugs on the end of the harnesses that attach to the lights; they either corode or get bent some how...does anyone know if you can get those wire harness ends from the dealer (the stuff that clicks into place) ? or do u have to replace the whole damn harness.
Thread
Thread Starter
Forum
Replies
Last Post
cmartinez530
Evo Electrical / Audio / Security
6
Apr 24, 2023 04:04 AM
EvoLLBlue8
Evo X Electrical / Audio / Security
3
Jun 23, 2017 09:39 AM