When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi guys, I'm selling a spare Evo 8 valve cover that I powdercoated myself. Trying to get some of my money back after investing in powdercoating equipment. This valve cover has been shaved and had the baffles removed for powdercoating, I drilled and tapped the valve cover so the baffles will be reattached. Also the valve cover will come with two 10 an fittings for running a catch can which the valve cover was tapped for. Will retake more pictures of the valve cover Along the my user name in a few hours. Also full disclosure there a few bubbles in the powdercoat but if i didn't mention it you probably would have never noticed them.
Last edited by SnailSpeed; Jun 17, 2019 at 09:58 AM.
Reply
Baffles were re attached using machine screws and high strength loctite, the heads of the screws have been drilled so that if you are extra paranoid about them backing out(I’m running a modded valve cover without chicken wire and they aren’t backing out.) you can install chicken wire which I will include.
