Description:

I have an unpainted replica OEM spoiler that was purchased from Amazon.

I purchased a trunk lid that already had an OEM spoiler installed because I did not want to drill holes into my OEM trunk in case I wanted to go back to wingless.

I had this spoiler installed unpainted on my car for a few months. The spoiler has the bolt pattern of an OEM spoiler however, the one bolt hole on the inside of the OEM spoiler goes down through the top of the spoiler but this copy has all of the screws/bolts go up through the bottom and I was only able to get 2 of the bolts on each side in without doing some additional modification to the trunk. I did not have any issues with it installed this way. If you have a trunk that doesn't have holes and you need to drill new ones then you should not have any issue because you will be able to attach all of the bolts through the bottom.

(Please ignore the wheel in the photo by the spoiler on the right side)