Description:

Purchased new on 12/24/03, this Evo was street driven for 2 years and then became a motorsports vehicle (SCCA SM class autocross, track days, and Unlimited 2 Time Trial), getting motorsports maintenance. It now features a full cage, 6 point harnesses, Racetech seats, and partially stripped interior (but still has A/C and radio/CD). Currently has NYS registration (thru 6/2023) & inspection (expires 8/2022). Last few dyno results have been 363HP to 393HP, depending on mods in place. Car has been rock solid reliable for 18 years. Car cover and two sets of OEM keys & fobs included.

Full photo & video album - https://photos.app.goo.gl/v7UY3c3oFme2An3M7

In-car at SCCA Time Trials National Tour @ Palmer Motorsports Park, 7/3/21 -

Modifications (updated 2022/02/28)



 Engine / Drivetrain

·       Blouch Evo 9 Dominator 1.0XTR Turbo (Ball Bearing)

·       Swain Tech White Lightning-coated JM Fab EVO Twin Scroll Exhaust Manifold,

·       STM ECU custom flash,

·       Injector Dynamics 1065cc injectors (p/n 1050.60.11.D.4)

·       GSC S2 cams,

·       Ported + Swain Tech White Lightning-coated OEM intake manifold,

·       MIL.SPEC 65mm throttle body,

·       AMS Intercooler,

·       AMS lower intercooler pipe,

·       Samco intercooler hoses,

·       ETS upper intercooler pipe,

·       STM intake & cone filter,

·       Cajun Powers's t-bolt clamp kit,

·       Evo 9 metal BOV,

·       Kiggly Racing 4G63 HLA Pressure Regulator

·       Hallman Pro manual boost controller,

·       Invidia O2 housing,

·       Perrin 3 inch Downpipe (Jet Hot 2000 coated),

·       Cat-delete test pipe,

·       Fujitsubo RA-01 exhaust,

·       TRE Transfer Case Rebuild w/ Ralliart LSD,

·       ACT HDSS clutch kit,

·       ACT Street Lite flywheel,

·       TRE Stage 2 Transmission w/ Evo 9 1st gear,

·       Driveshaft Shop Carbon Fiber 2 Piece Rear Driveshaft,

·       TRE Rear Diff mod,

·       AMS cam-side, trans-side, and front motor mount urethane bushings, solid driveshaft carrier bearing support bushings,

·       Power Enterprise Super Strong balance belt and timing belt,

·       Power Enterprise Super V accessory belt,

·       CBRD aluminum radiator w/ Greddy 1.3 bar radiator cap,

·       Essex Competition Brake System (front)

o    (includes AP Racing 4 piston calipers and two-piece dimpled rotors) w/ Ferrodo DSUNO pads (front),

·       Racing Brake 1-piece slotted rotors w/ Hawk HP+ pads (rear),

·       Spiegler/Technafit Steel Braided Brake Lines (front/rear),

·       ARP lug studs,

·       AMS Brake Duct Kit,

·       AMS Small Battery Kit.



 Wheels / Tires

• Enkei RPF1 17x8.5 +30 w/ Hankook Ventus RS4 255/40R17 (good tread)
• Enkei RPF1 17x8.5 +30 w/ Nitto NT01 255/40R17 (almost used up)

 

 Suspension

·       Cusco Titanium Front Strut Tower Brace,

·       Perrin PSRS Front Lower Control Arm bushings,

·       WORKS Urethane Bushing Kit (Front Anti-sway Bar, Front Lower Control Arm, Rear Bump Steer, Rear Upper Control Arm, Rear Lower Control Arm Forward + Rearward, Rear Trailing Arm),

·       Whiteline Rollcenter Adjustment kit,

·       WORKS/Öhlins Stage III DFV Coilovers w/ Swift springs (12Kg/mm front / 14Kg/mm rear),

·       Cusco camber plates (front)  Piro Ball 564 410 A

·       Cusco rear strut mounts

·       WORKS Racing Program Rear Pillow Ball Mounts,

·       Perrin Rear Sway Bar Endlinks,

·       Perrin Front Lower Control Arm Brace,

·       AMS Moustache Bar Eliminator Kit,

·       AMS lightweight Front Crossmember.



 Interior / Exterior

·       Rennessy Fabrication custom Carbon Fiber Sunroof plug,

·       eBay urethane lower bumper lip,

·       Mitsubishi MR Rear Vortex Generator,

·       Kognition Design Carbon Fiber wing,

·       Rennessy Fabrication 6 point roll cage,

·       Racetech 4009W seats & mounts w/ Buddy Club Racing Seat Sliders,

·       Schroth Enduro 6 point harness (driver) and Profi II 6 point harness (passenger),

·       Beatrush Rear Bulkhead Panel,

·       XPEL Headlight / Sideview Mirror Film,

·       Black/White Gauge Overlay package,

·       Defi 60mm Boost/EGT/Oil Pressure gauges,

·       Defi Dashboard Gauge Pod,

·       Defi Link II Control Unit,

·       OEM Carbon Fiber E-Brake Handle,

·       AMS Shift Knob,

·       Momo Racing Mod. 78 steering wheel,

·       NRG 2.5 Quick-Release Steering Hub,

·       All-View Race Mirror,

·       Mitsubishi Blue Racing Pedal Kit

SPARE PARTS LIST (availability not guaranteed; may be sold separately unless part is specifically requested to be included)

***FLUIDS***
8 x 5qt Mobil1 10W-30 motor oil
12 x 1qt Mobil 1 10W-30 motor oil
7 x Motul Gear300 75W90
6.5 x Redline 80W140 gear oil
1 x Redline MT-90
Partial can x Mitsubishi Diaqueen SAE90 LSD gear oil
8 x Mitsubishi MZ690116 oil filter
4 x Mobil 1 M1-108 oil filter
3 x Hawk Performance hi-temp brake grease packets

**Brakes**
1 x AP Racing front rotor set (new) 1901912(LH) & 1901913(RH) 1.25x12.81 J-hook, hardware inc.
3 x Ferodo front pad sets (new) FRP3116Z
1 x Ferodo rear pads set (new) FCP1562W
2 x Hawk rear pad sets in Hawk HP Plus front pad box (likely HP Plus)
1 x rear pad sets (used) in Ferodo box 1 x front pad set (used in Ferodo box

**Spark Plugs**
3 x NGK Iridium 4-pack BPR7EIX #4055

***Stock Parts***
Mits Evo floor mats
Rear seat bench & back
Rear seat back bolts
BlueByYou Carbon Fiber wing
Trunk floor
Strut tower brace
sunroof glass
interior head liner
interior sunroof trim exterior
BBY front lip
drive shaft
1 x intake & exhaust cams
4 x stock fuel injectors
1 x Exhaust header nut MR224500
1 x PCV valve MD152772
1 x bolt right rear suspension MB856459
1 x Kart Boy urethane exhaust hangar bushing
2 x splash clips MB547806
1 x 10pc splash clip MB547806
1 x fr brake shim set (one caliper) MR475618
2 x engine bay fuse covers (1 lrg, 1 narrow)
1 x oil pan drain plug
1 x (used) rear fender liner hardware
1 x brake bleeder rubber caps 3pc MR407368
8 x eng ro clip 1pc MU488006
10 x retaining clip MR288150
unmarked clips inc 4 x phillip head clips, 2 x hex head bolts
1 x radiator cap
1 x o2 sensor MN153010 (replaced assuming bad, but problem was with tune so likely not bad, just used)
1 x used shifter bushings, washers, cotter pins
2 x stock rubber pedal covers (clutch, brake) removed for OEM blue cover kit
1 x sunblock shield for Evo windshield
1 x stock turbo (~50Kmi) w/ 10.5 hotside conversion
1 x stock alternator pulley
1 x stock HLA presure regulator
1 x stock cam sensor cover

***Aftermarket parts***
1 x High-flow catalytic converter (unknown brand)
1 x GrimmSpeed Evo 8/9 Head to Intake Manifold gasket p/n 020006
NRG QuickLock for QuickRelease - SRK-101LS (2 keys)
APR front splitter w/ extra bolt hardware
Aluminum plug for rear wiper delete
1 x Airtek Idle Air Control valve 2H1076 (new, Rock Auto)
1 x Kicks magnetic drain plug M14xP1.5 (blue)
1 x original (non-antitheft) Kognition wing bolt
1 x Greddy radiator cap Type S GRC-13S
1 x Titek magnetic drain plug M14x1.50 blue
1 x TiAL BOV Black spring
Box of extra tamper-resistant bolts for Kognition wing
1 x Box of extra tamper-resistant nuts for Kognition wing
3 x Schroth adjusting grips (6pt belts) P/N00092
1 x Schroth elastic band kit P/N 00050
1 x GrimmSpeed Evo 8/9 Throttle Body Gasket P/N 020008
1 x set Precision Injected 1000cc low impedance injectors (used)
1 x set HKS 272 cams 22002-AM003,-AM004 (used ~30k mi)

 Known Issues

• Defi Oil Pressure gauge does not work.  Believe the sensor wires were pulled when a cone was run over during an autocross.  Currently, it registers oil pressure for about 30 seconds when the car is first started before it stops working.  Plan was to replace the gauges with a set of ProSport gauges, and to go to a Boost/EGT/Oil Temp setup as has been recommended by STM and other mechanics.