|
WTB: modified OEM crash beam for Evo IX to fit jdm rear bumper
I'm looking for a rear OEM crash beam/bar that has been modified to fit the jdm bumper. The mounting brackets were cut off to clear the jdm bumper.
|
I believe STMs says it will work with JDM bumpers...
|
The thing is, I bought my car used. It didn't have the rear crash bar. The previous owner probably removed it.
|
Originally Posted by 14RedEvoIX
(Post 11855495)
The thing is, I bought my car used. It didn't have the rear crash bar. The previous owner probably removed it.
https://stmtuned.com/collections/stm...er-support-bar |
Originally Posted by Crankwalker
(Post 11855515)
I'm pretty sure the factory rear beam will not work with the JDM bumper and you have to remove it. STM makes a lightweight rear bumper support that works with the USDM and JDM bumper.
https://stmtuned.com/collections/stm...er-support-bar you can modify the stock crash beam to make it work with the jdm rear. |
I have a spare stock rear crash beam if your interested PM me. It would require a simple modification to work with the JDM rear. A write up on the modification is in the link below. http://www.superstreetonline.com/how...volution-viii/ |
Originally Posted by joezthegame
(Post 11863684)
I have a spare stock rear crash beam if your interested PM me. It would require a simple modification to work with the JDM rear. A write up on the modification is in the link below. http://www.superstreetonline.com/how...volution-viii/ |
| All times are GMT -7. The time now is 05:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands