Evo 8 coil on plug setup
 

Hi I am selling a coil on plug setup that I made for an EVO 8(I have 3 put together and one packed for shipping). All materials were purchased from spoolin up except for the aluminum mounting plate. I would also like to add that all connections were professionally soldered instead of crimped for better connection(I soldered because Im into the drone hobby and build my own aircraft and havent had any issues so far, check pic of my drone which I use for filming). If you are pushing some decent boost you may notice that your car may start to blow out spark, this is the solution to your problem. This is a plug and play setup and comes with everything you need to install it. Again everything is new except for the ignition coils are slightly used but are in extremely good condition. Some specs about the setup:

-Mil spec 18 gauge tefzel wire
-Spoolin up ignition coil connectors
-Harness is sleeved in high temp expandable sheath
-All connections are soldered
-Spoolin up male Mitsubishi coil connectors
-Aluminum plate .125" tapped for M6x1.0 to secure the coil packs
-COP will be shipped preassembled, all you have to do is drop it in place of the stock ignition system
-Will fit under the factory ignition coil cover

Coil on plug
 

Interated
 

Got one left.