t bolt hose clamp size info
Thread Starter
Evolving Member
iTrader: (5)
Joined: Aug 2004
Posts: 328
Likes: 0
From: Just moved to Denver
t bolt hose clamp size info
Hey all,
I popped the lower iC pipe hose (AMS) this week-end and want to replace the clamps. I was told on a previous post that NAPA carries them. Now I need to know which size I need. I just want to replace the one that goes from the IC to the lower pipe. Maybe somebody has done all the work already and could point me in the right direction. Thanks,
Sigfrid
I popped the lower iC pipe hose (AMS) this week-end and want to replace the clamps. I was told on a previous post that NAPA carries them. Now I need to know which size I need. I just want to replace the one that goes from the IC to the lower pipe. Maybe somebody has done all the work already and could point me in the right direction. Thanks,
Sigfrid
The diameter you're shooting for is the diameter of the pipe + the thickness of the silicon coupling. A coupling adds roughtly 1/8" or .125" to the diameter. So a 2.5" pipe will use around a 2.625" clamp.
Thread
Thread Starter
Forum
Replies
Last Post
Eric Lyublinsky
Evo Engine / Turbo / Drivetrain
3
Sep 14, 2013 12:26 PM
silvrevo
Evo Engine / Turbo / Drivetrain
13
Aug 18, 2004 07:30 AM