Mark this thread as Unsold
Buschur UICP - Tial Flanged + Blow Thru
Thread Starter
Evolving Member
iTrader: (10)
Joined: Jan 2007
Posts: 376
Likes: 0
From: league city, texas
Buschur UICP - Tial Flanged + Blow Thru
Buschur Racing Evolution Deluxe Upper I/C Pipe Kit, with Tial 50mm flange. Upper has piping cutout for blow-thru setup and 2 couplers (ETS couplers, high dollar lol)for 3" GM MAF needed when using blow through. Also, this pipe also has a hole drilled for meth nozzle right before the TB, it can be welded closed if the buyer prefers (at no charge). I used to have a nitrous line it it as well, but it was taken off and the small hole filled in. We have a tig here at our discrection now, so anything needing be welded is TIG 
.
All piping is painted black, comes with blue couplers and T-Bolt clamps.
I bought the piping kit from buschur $310 ($280 plus shipping), then welded on the tial flange $45 (flange+local welding shop), and bought the 2 beefy ETS couplers for the new MAF ($42).
$300 shipped.
If buyer wants, I can include a section of 2.5" piping and 2 couplers to replace the section missing for the blow through ($25 extra or trade for the ets couplers lol). I can also cut off the tial flange and weld another on there if you want (pm for pricing).
.All piping is painted black, comes with blue couplers and T-Bolt clamps.
I bought the piping kit from buschur $310 ($280 plus shipping), then welded on the tial flange $45 (flange+local welding shop), and bought the 2 beefy ETS couplers for the new MAF ($42).
$300 shipped.
If buyer wants, I can include a section of 2.5" piping and 2 couplers to replace the section missing for the blow through ($25 extra or trade for the ets couplers lol). I can also cut off the tial flange and weld another on there if you want (pm for pricing).
