SST Filter and Fluid Change Solved Codes P2733 and P2809
Jun 30, 2017, 08:13 PM
#1
Newbie
Thread Starter
Join Date: May 2017
Location: L.A
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
SST Filter and Fluid Change Solved Codes P2733 and P2809
Hello everyone, I am new to the forums. I bought a used 2010 Evo x MR and everything was fine until I decided to use the S-Sport on a hard run, transmission service message came on and shortly after the engine light with the codes P2733 and P2809.
The transmission will go into limb mode after 30 minutes drive and 100 miles on the clock. Given my options, I decided to change the transmission fluid and it's filter, while doing it I notice that the old fluid was burned and with a dark brown color.
It has been 325 miles since the replacement fluid and filter. After some research, I decided to use sport mode at all time while shifting manually with the paddles. Anyway, everything is running smooth. So if you are having similar issues this could fix your tranny problem.
The transmission will go into limb mode after 30 minutes drive and 100 miles on the clock. Given my options, I decided to change the transmission fluid and it's filter, while doing it I notice that the old fluid was burned and with a dark brown color.
It has been 325 miles since the replacement fluid and filter. After some research, I decided to use sport mode at all time while shifting manually with the paddles. Anyway, everything is running smooth. So if you are having similar issues this could fix your tranny problem.
Thread
Thread Starter
Forum
Replies
Last Post
ecl27
09+ Ralliart Engine/Turbo/Drivetrain
12
Mar 3, 2014 10:28 PM
HimynameisWillzyx
South Region
5
Feb 2, 2013 05:50 PM
MagicManRed
Evo Engine / Turbo / Drivetrain
2
Jun 29, 2008 10:40 AM
06RS
Evo General
17
Sep 25, 2007 07:37 AM
