Mark this thread as Unsold
FS[Northeast]: 2.2 LR kit, Manley billet crank, Carrillo rods, CP pistons
Jul 28, 2015, 11:44 AM
#1
2.2 LR kit, Manley billet crank, Carrillo rods, CP pistons
SOLD
parting out my 2.2 LR. less than 5k miles on the crank and rods. CP pistons are new in box.
located in Carlisle PA 17013. prefer pickup but will ship at buyers expense.
Manley 94mm billet crank ($1400)
Carrillo 156mm rods ($800)
CP coated pistons, .020 (.5mm) over bored ($600)
looking to get $1700
parting out my 2.2 LR. less than 5k miles on the crank and rods. CP pistons are new in box.
located in Carlisle PA 17013. prefer pickup but will ship at buyers expense.
Manley 94mm billet crank ($1400)
Carrillo 156mm rods ($800)
CP coated pistons, .020 (.5mm) over bored ($600)
looking to get $1700
Last edited by honda-guy; Jan 29, 2016 at 07:16 AM.
.
Jul 30, 2015, 04:40 AM
#3
2.2 LR is the new cool thing for track cars 
here's a kit with same parts
http://realstreetperformance.com/GSC...T-Evo-5-9.html
here's a kit with same parts
http://realstreetperformance.com/GSC...T-Evo-5-9.html
Last edited by honda-guy; Jul 30, 2015 at 04:46 AM.
Jul 30, 2015, 09:23 AM
#5
the 2.2 was going to give me extra low end power and torque on 93 pump gas, as i was still driving my car to and from track. but i've decided to tow the car all the time now, which means i can run e85. so going to run stock long block with stock turbo. more than enough for for my 320 whp limit with plenty of low end power from e85. then will probably do small efr turbo down the road.
Aug 28, 2015, 02:46 PM
#6
Is it the actual kit or something you pieced together?
Are the rods 156mm or 153mm? That GSC site you links implies 153mm which would be in line with other standard 4G63 2.2L kits. 156mm rod would require a different piston than a standard "stroker" piston for the 4G63.
What is the compression ratio?
Are the rods 156mm or 153mm? That GSC site you links implies 153mm which would be in line with other standard 4G63 2.2L kits. 156mm rod would require a different piston than a standard "stroker" piston for the 4G63.
What is the compression ratio?
Aug 28, 2015, 03:46 PM
#7
EvoM Guru
iTrader: (1)
Rods are 156mm, CP makes a shelf piston for it..
Trending Topics
Aug 29, 2015, 05:21 AM
#8
^ correct. this came from a 2.2 build. the pistons got damaged. so new pistons were are ordered. CP makes pistons for 156mm rods with 94mm crank
and the link i posted is pretty much the exact thing i have
and the link i posted is pretty much the exact thing i have
Last edited by honda-guy; Aug 31, 2015 at 05:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[Northeast]: 2.2 LR kit, Manley billet crank, Carrillo rods, CP pistons
honda-guy
For Sale/WTB - Engine / Drivetrain / Power
11
Sep 17, 2015 04:57 AM
Moore Auto
EvoX 'For Sale' Engine Internals and Drivetrain
11
Feb 10, 2015 08:39 AM
TitanMotorsport
Evo 'For Sale' Engine Internals and Drivetrain
29
Aug 14, 2013 01:16 PM
laksman91
Evo X Engine / Turbo / Drivetrain
3
Aug 21, 2012 09:30 PM
SBR INC
Evo Vendor 'Group Buy / Specials' Classifieds
2
Oct 16, 2009 06:33 AM