AST, Vorshlag, RPF, NT01, Sparco, APR, "Cool Shirt"
AST, Vorshlag, RPF, NT01, Sparco, "Cool Shirt"
It kills me to do this, but here goes: All prices are for parts only, PayPal fees and shipping are extra. I believe I have priced all parts competitively to other ads I've seen, feel free to let me know if I'm too high. *AST 4100 purchased from a known member here about a year ago. He stated they had a fresh rebuild. Since then, I have put two HPDE and four AutoX events on them. Current spring rates are 9k front and 10k rear. I have other springs I can throw in, I believe they are 6, 7, and 8k, but would have to look. All threads, adjustment knobs, etc work perfectly. No damage to them whatsoever, no leaks, etc. Camber Plates are NOT included. $1100 including all the springs I have laying around. *Vorshlag camber plates. Also in great shape, no damage, etc. $375 *Enkei RPF-1, F1 Silver. 17x9.5+38 with 255 Nitto NT-01. Wheels are a year old with the only damage being a scuff on one of them. See pics, where i took a before/after rubbing grease in the scuff so it would be visible. Tires have one HPDE and one AutoX event on them. Of course, they are good until the cord, unlike most tires. Original valve stems all around. Valve stem caps are not shown i pictures but included. Ichiba V2 25mm spacers included. Everything ready to throw on and run. $1,500 *Sparco Evo II VTR seat. some scratches on shell from installtion/removal, but not so much as a wear spot on the fabric or damage anywhere else. GREAT seat. Comfortable. Expires 2020 $600 *Self-Built 13qt "cool shirt" system, never used. Built following the parts list and instructions from http://www.ultrachiller.com/catalog/diy.php but I used a much better ice chest, as shown here: http://coolshirt.com/product/club-system/ Cooler and 4' of tubing, no shirt. Fittings on tubing are the metal clips so are supposed to work with Cool Shirts, Ultrachiller, and FAST shirts. $200 *APR GTC200 wing: some flaking of clear coat along rear trailing edge and spots shown in pics. no structural damage. I found this to make the car really neutral without risers and no front splitter. Works really well, I was surprised. Fits into stock-location holes. $500 https://cimg8.ibsrv.net/gimg/www.evo...6d9aa7586b.jpg https://cimg9.ibsrv.net/gimg/www.evo...51a8c546f2.jpg https://cimg0.ibsrv.net/gimg/www.evo...008a7e2934.jpg https://cimg2.ibsrv.net/gimg/www.evo...e737da8067.jpg https://cimg3.ibsrv.net/gimg/www.evo...2ec7ecd696.jpg https://cimg4.ibsrv.net/gimg/www.evo...624cfa7002.jpg https://cimg7.ibsrv.net/gimg/www.evo...518e0cd62e.jpg https://cimg9.ibsrv.net/gimg/www.evo...a99303db2a.jpg https://cimg0.ibsrv.net/gimg/www.evo...00f678336a.jpg https://cimg5.ibsrv.net/gimg/www.evo...382eb7f1bb.jpg https://cimg7.ibsrv.net/gimg/www.evo...08f22cb019.jpg https://cimg8.ibsrv.net/gimg/www.evo...4b0be26935.jpg https://cimg0.ibsrv.net/gimg/www.evo...099fe0b9b4.jpg https://cimg1.ibsrv.net/gimg/www.evo...398f9b8840.jpg https://cimg2.ibsrv.net/gimg/www.evo...76833c0fbc.jpg https://cimg3.ibsrv.net/gimg/www.evo...365a894929.jpg https://cimg6.ibsrv.net/gimg/www.evo...581ec63e0a.jpg https://cimg7.ibsrv.net/gimg/www.evo...ae4b6c839b.jpg https://cimg9.ibsrv.net/gimg/www.evo...d755021c4e.jpg |
Bump, bump, bump it up
|
Bump
|
ttt
|
Hey There. You still got the cool shirt system available?
|
Yes. All it needs is a T-Shirt!
|
ill flick you a pm. think ill grab it from you if your happy to ship it to me.
|
Kaj, you wouldn't be willing to part ways with just a set of springs by chance? If so, are the 10k rears a 7" length and 2.5" ID by chance? If so, let's chat. :D
|
I'm not looking to pull the coilovers apart, no. Sorry. :crap:
|
More pics of the wing? Also how'd it work out for you?
|
Originally Posted by V.8MR
(Post 11778375)
More pics of the wing? Also how'd it work out for you?
I'm looking forward into installing risers (will make my own- the APR pieces are expensive to have shipped) and my front splitter. |
All times are GMT -7. The time now is 07:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands