When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Engine:
Aluminum Rod 2.4
- JE Pistons (8.5:1)
- BME Rods
- OEM 100mm Crank
- Kiggly Springs and Retainers
- Supertech Valves
- Bronze Valve Guides
- Stubby balance shaft
- Straight cut oil pump gears
- Kelford 276 High Lift cams
- ITM Revised Lifters
- ARP 625+ Head Studs
- AEM Tru Time Cam Gears
- Shaved Valve Cover with throttle cable bolt hole deleted power coated wrinkle black
- Clear cam gear cover
- Carbon Creations Carbon Fiber Spark Plug Cover
Forced Induction
- STM Forward Facing Hot Parts Kits
- STM LICP
- JM Fab UICP
- JM Fab Drag Intake Manifold
- ETS 4" FMIC
- BorgWarner S257 Sx-e turbo (t3 .82 ar turbine housing)
- English Racing Boost Activated Cutout
- Buschur Racing Catback
- Boomba Throttle Body
- Buschwacker Ultimate Ratio transmission w/ Evo 8 jdm 5th gear and 4.11 final drive
- Exedy Triple Disc Clutch
- Qualfe LSD Differential
- Solid Driveshaft bushings
- Solid Shifter bushings
- Polyurethane Diff Bushings
- Plate swapped evo 9 rear diff
Suspension:
- Cusco Strut bar
- Whitelines front anti sway bar
- Whitelines rear anti roll bar
- Megan Racing Street Coilovers
- Whitelines Power steering rack bushings
- DD Rear Lower Control Arms
- Carbon Creations Carbon Fiber Front Fenders
- Custom sunroof delete
- NRG Carbon fiber roof overlay
- JM Fab Fuel Rail
- JM Fab Billet Oil Cap
- JDM Rear Bumper
- Vibrant Rear Muffler
- Wrap the non carbon parts a different color (haven't decided on a color)
Last edited by cficare68; May 31, 2018 at 01:35 AM.
Crap roads, a curb to get into my driveway, and around 1k in ground effects that i would prefer not to destory and wheels with a massive offset that rub on rolled and pulled quarter panels when launching if its any lower. Take your pick. Car also spent a month and a half on jackstands on all four corners as well. So the suspension needs to resettle.
Last edited by cficare68; May 31, 2018 at 05:09 PM.
Waoooo, cant wait to post mine here after almost 6 years of being out of the game.
Tentative mod list below upon completion:
engine
-2.0LR
-port flow designs built head
-GSC S2 cams
-GSC valvetrain
-ARP L19 headstuds
-stock 9 turbo Mil.Spec ported (until I get used to the car again)
-Curt Brown extreme ported intake manifold
-Curt Brown extreme ported FP cast manifold
-Mil.Spec ported 65mm TB
-Mil.Spec ported invidia o2 housing
-Moroso oil pan
-Injectors TBD
Suspension/brakes
-JRZ RS Pros
-Perrin PSRS
-Whiteline bumpsteer kit
-Robispec 26mm sway bar
-AP Racing 4 pot front brake kit
What is your plan for the EvO. Will you be tracking it hard like years ago, or are you considering it just a hard core streeter?
Maybe both?
For me, I was working the Fontana track hard (at least i thought so) but the cost, risk factors & the overall condition of the car made me move it off the track. Been cleaning mine up & enjoying the increasing value of the EvO (could sell it for what I paid for it 10 years ago
Just had RRE do my 60K service & had the S2's installed w/the FP HTA71 (runs good & idles sweet)
What is your plan for the EvO. Will you be tracking it hard like years ago, or are you considering it just a hard core streeter?
Maybe both?
For me, I was working the Fontana track hard (at least i thought so) but the cost, risk factors & the overall condition of the car made me move it off the track. Been cleaning mine up & enjoying the increasing value of the EvO (could sell it for what I paid for it 10 years ago
Just had RRE do my 60K service & had the S2's installed w/the FP HTA71 (runs good & idles sweet)
Joe
whats up joe! Ill be tracking but not quite as often as I used to because of work. Maybe 6 track days or so per year and some light street duty of 5-10k miles per year. Im way upside down compared to what Ive put into the evo so resale value isnt even taken into consideration haha how are you liking the s2s?
The S2's rumble for sure. Its just a little softer on the bottom & requires just a bit more rev & clutch slip in 1st. My tune has my setup limited to 7500 RPM but, for sure, there is more power up top
You probably want to re-think that Moroso pan. Since you've been away we realized it's really good for drag Gs but not lateral Gs. There are other options out now that you should look into like the RaceFab.
I didn't know Mil.spec was porting o2 housings now. I couldn't find it on their site is this a local hook up or something?
You probably want to re-think that Moroso pan. Since you've been away we realized it's really good for drag Gs but not lateral Gs. There are other options out now that you should look into like the RaceFab.
I didn't know Mil.spec was porting o2 housings now. I couldn't find it on their site is this a local hook up or something?
May 31, 2018, 01:15 AM
. Been cleaning mine up & enjoying the increasing value of the EvO (could sell it for what I paid for it 10 years ago
