Xplosiv

I think the wind speed and angles are going to be a very important factor. Ive been over 130 numerous times without issue. But I generally dont drive that fast on exceptionally windy days just because okie wind can push the whole car off the road lol.

silverevo05

iTrader: (7)

Still have that M3 gurney flap but im hesitant to put it on my 8 wing since they are not around that much anymore

MinusPrevious

iTrader: (3)

(BTW, talk about unearthing an old thread)

The 8 wing, from what ive read, is filled w/poly-U foam & has a lot more structure as a result

The 9 wing is hollow & under the right circumstances, can fail (as i know too well)

I think youre Ok to run that flap @silverevo05

silverevo05

iTrader: (7)

damn straight haha....very few old timers left. ive been off this site for almost a year, and just got back into it again.

i really liked the look, but cant find the pic from behind of the wing with the m3 spoiler, but ya i wouldnt risk it because i don think i can find anothe nice 8 silver wing

Balrok

iTrader: (15)

You could also simply add bracing. If it's a race car I'd get a Billet water jet piece and place it in the middle. If it's a street car i'd make a piece of billet or carbon the length of the wing underneath and into the sides.

Pirana

iTrader: (43)

these were my wings. I folded 2 ix wings with gurney flaps. Now i use a viii wing with a gurney flap and no problems yet

MinusPrevious

iTrader: (3)

Thanks Vic. Yeah, remember seeing that pic. Great to see you still on the boards

Joe

kaj

iTrader: (60)

When I made mine, I followed an article that had recommendation on the max useable height for a gurney flap. Anyone looking into that or does it really not matter and I was per thinking it?

kyoo

iTrader: (29)

i did the 9 to 8 wing swap for the added strength, given i've folded one. was tough to find a wicked white one (05 evos only) it's minor but damn i think the 9 wing looks better.

LetsGetThisDone

iTrader: (1)

The wings are identical except hollow vs filled, and the inside panels of the end plates are painted body color on the 9 wing. The paint can easily be done on an 8 wing.

kyoo

iTrader: (29)

i thought it's blocked off, not just painted. hence the bolts that show on the 8's

codgi

iTrader: (22)

Yeah I don't think that's right. The VIII's side plates are also carbon fiber (and there used to be TODO here for the VIII wing as to how to remove the outside end plates so you can see all the carbon fiber) while AFAIR the IX only the wing itself was carbon. This was around the time of the mid 2000s global carbon fiber "shortage" and as I remember it was given as the reason for the change. Even if I remember this wrong, OEM the VIII has those bolts exposed so just painting the inside wouldn't give you the exact same look as can be seen in the pic above where the IX's end plates don't expose those bolts.

OT I had the OEM IX gurney flap on my VIII wing it never had any issues with years of tracking. So it should work well for others.

psushoe

iTrader: (8)

Has anyone considered or tried filling the IX wing with an expandable foam or something similar?

MinusPrevious

iTrader: (3)

I needed this suggestion back in 2013 when i posted this

ViciousLSD

iTrader: (2)

I would like to try an inject foam and maybe add an aluminum bar, if someone could please help me figure out how to separate the horizontal from the sides