does anyone know of a shop around this area that carries them / or can get them? or anyone that has one that they would be interested in selling. send me a pm. thanks

 

I don't know a shop around, But check out 500whp.com That's where I got mine from and I don't think you'll be able to beat their price.

 

I have an extra radio relocation holder frame. But I don't have extra brackets. You might be able to get the brackets from an audio store or you might be able to use your stock ones

 

I haven't done it but there are people on the site that say you don't need a radio relocation kit,just swap gauges with radio and your done.Try searching Evo Audio & Security.

 

I didnt notice you have an MR You don't need the frame you need the brackets then... cause the MR gauges don't use brackets that you can swap with the radio

 

do you know what type of brackets they are?

 

like your stock ones but shorter

 

if you're just swapping the guages and the radio.. you don't need a kit.. it is done with what is already there on an MR. I've done several of them. Not sure if this is what you are talking about because your message is somewhat vague.

 

Are you doing a double din? or a reg deck? I did the dd kenwood touch screen. If thats what you wanted to do i can meet you somewhere to show you....you are local.

Image Hosting

 

+1. Did this exact same thing with my setup and the MR gauges (Mitsu installed them in the lower DIN).

 

Unless you can reuse your stock radio brackets, you will need shorter ones to relocate them on the bottom

 

On the MR it has a plastic type spacer so you just use what came with the car. No kit required.

 

just swap the brackets from the radio with the guages. I helped John with his when he got his car... 06 MR as well.. do a search on here in the how to..

there is a link here >>> https://www.evolutionm.net/forums/sh...ght=radio+swap