dcamp56

I have a 92 eclipse gsx, brand new TTR built tranny, brand new clutch master cylinder and slave cylinder, new stealbraided clutch line. Pretty much everything is new on my drive train. Purchased a ACT 6puck clutch with Street light flywheel new also from Extreme PSI installed everything and the clutch doesnt feel like its engaging all the way. Adjusted the pedal a million times and bleed the system a million times. i also put in the slave cylinder extension rod. Has anyone seen this problem before?

IF i start the car in gear i can drive it once i stop i have to shut car off and back on, wen im driving an i put the clutch in n push the gas the RPM dont fly up like they should. PIcs below is the clutch it has about 7miles on it max

JDMCT9MR

iTrader: (56)

Have you taken it back to the shop to have it checked out?

turbolarry

iTrader: (1)

I haven't worked on a DSM in a long time, but what about the release bearing arm and the pivot ball?
Scroll down to the bottom;
http://www.roadraceengineering.com/c...ywheeltech.htm

turbotalawd

iTrader: (11)

How much play is there in your clutch pedal? Chances are that the bushings on the pedal assembly are bad. Check out other dsm websites and john sheperd's website. This is a common problem on 1g's.

dcamp56

new clutch fork,throw out bearing new everything there not very much play in the pedal

the pedal feels really stiff

turbotalawd

iTrader: (11)

im not talking about pedal stiffness. the way to check pedal play is by pushing the clutch all the way in and fully releasing it. once you have your foot off, see how much travel there is from where its stopped to the top of its travel. 1g all had this problem. chances are that its the pedal assembly.

dcamp56

ya ill check that out ACT wants me to send the clutch back in for inspection

boostedorbusted

iTrader: (22)

could be the bushings in the clutch pedal assembly.. shep rebuilds them for $120
ive had to replace it in 5 of the 6 dsm's ive owned all 1g's.

dcamp56

nah it was the clutch ACT sent us a new one and its all good again

turbotalawd

iTrader: (11)

Good deal. Glad you got it sorted out. Did they say what was wrong with it? Pressure Plate?

dcamp56

they said the clutch disc was messed up but i no it was the pressure plate. They replaced it but they said the other one was fine....lol