MMC Airtrek 2.2 GTX3071R
Jun 17, 2014, 03:15 PM
#31
Newbie
Thread Starter
You need front LSD from evo 7-9 ( of course the one from evo 9 is preferable since it is newer). Rear LSD are the same from evo 4 to evo 10 but you need it frm RS model only.
Oct 4, 2015, 02:53 PM
#33
Newbie
Thread Starter
The stock tranny is surprisingly still alive after countless numbers of launches with up to 2 Bar boost. The engine now is 2.4 with 100 mm Manley crank shaft with 4g64 block. Turbo has been also changed for GTX3076R .
May 13, 2016, 09:57 PM
#34
Newbie
Thread Starter
Update- the turbo is growing)) Now I'll be running 2.4L stroker with Twin scroll GTX3584 by Mamba. It surely outperformes Garrett GTX3582 by somewhat like 40-50whp... Expecting to get about 600+ Crank hp on the pump gas (Mustang dyno).
Jul 3, 2016, 02:15 PM
#35
Newbie
Thread Starter
The stroker is put together and the turbo kit is installed. The plan is changed now- aiming for 550 whp on the race gas with 35 psi of boost.
https://www.drive2.ru/l/10337599/
https://www.drive2.ru/l/10337599/
Sep 22, 2017, 02:33 PM
#36
Newbie
Thread Starter
It all worked out well - ended up with best ET of 10.955 sec. 2.2 Bar boost on race gas with 1mm oversize valves in the head. However the 60ft time is quite slow - just 2 sec, can't get the big turbo to spool quick enough to make good boost for lounch, it is just 0.5 Bar. It can make that up to 0.9 Bar for a dicent start but it takes too long to build up the boost. That is why I'm going to install NOS kit for the next season and try to brake 10 seconds)) Aiming high...
The following users liked this post:
georg1970 (Mar 21, 2018)
Dec 22, 2017, 02:24 PM
#38
Hi I just stumbled upon your build and it looks great! Just got my hands on an Airtrek and I was wondering where you sourced your Airtrek front clip and rear bumper? I can’t seem to find anything using a general google search or Yahoo Auctions. If you have anything I could use that would be great.
The following users liked this post:
georg1970 (Mar 21, 2018)
Mar 21, 2018, 11:18 PM
#39
Newbie
Thread Starter
Mar 21, 2018, 11:21 PM
#40
Newbie
Thread Starter
Hi I just stumbled upon your build and it looks great! Just got my hands on an Airtrek and I was wondering where you sourced your Airtrek front clip and rear bumper? I can’t seem to find anything using a general google search or Yahoo Auctions. If you have anything I could use that would be great.
Here is the link for ebay - someone in Russia is selling them https://www.ebay.com/itm/Front-bumpe...lZGZeC&vxp=mtr
Last edited by georg1970; Mar 22, 2018 at 02:47 PM.
May 13, 2020, 05:57 PM
#43
Newbie
Join Date: May 2020
Location: Oklahoma
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Mitsubishi outlander 2.4l to Airtrek 4g63t
So I'm trying to swap the motor on the north America version to the 4g63t but this car comes with 2wd and the Airtrek motor has 4wd transmission.
If it's still active here. Are there any transmissions that are 2wd and would mount on the motor and the chassis of the car?
If it's still active here. Are there any transmissions that are 2wd and would mount on the motor and the chassis of the car?
Jul 28, 2020, 12:32 AM
#44
Newbie
Thread Starter
60 ft -1.45
0-100 2.2
100-200 4.5
Some videos are posted here
https://www.drive2.ru/l/565746287442395198/
Jul 28, 2020, 12:59 AM
#45
Evolving Member
new ET -9.5
60 ft -1.45
0-100 2.2
100-200 4.5
Some videos are posted here
https://www.drive2.ru/l/565746287442395198/
60 ft -1.45
0-100 2.2
100-200 4.5
Some videos are posted here
https://www.drive2.ru/l/565746287442395198/
Amazing! What is the driveline? Auto still?