s3xrapt0r

i just picked up this outlander last month off my grandpop for 2k.. he got a new outlander sport and offered me it so why not... my other car is an mr2 and its about to be winter and thats just bad news... on top of that it only has 79k


current mods
6k hids
black duck bill on rear hatch
smoked tails
full undercoat (figured id do it so it wont rust)
full detail (it was VERY dirty when i got it)



my plans
Evo front struts/lancer struts in rear with evo tein springs (5.9 inch drop on an outlander)
rally armor mudflaps
3g eclipse mesh 17s (got these for free off a friend... they need some sanding and new tires)
3k fogs
tint the windows
normal maintenance... i need to change the transfer case and diff oil very soon and get a new flex pipe.. i just did the belts,plugs and coolant flush

CalypsoGST

iTrader: (2)

Heres Mine Lowered
Make sure you have camber bolts for the front if you dont plan on getting camber mounts. My Outlander didn't have any so I had to run to Mitsu to get the bolts. I doubt youll have this problem but my 8 rims rub in the back with more aggressive turns. They rub on the inside not the outside so You may still run into the problem. Have fun!

s3xrapt0r

damn calypso !! nice and clean bro !! i sent you a message about your set up

i just put a shorty antenna and some rally armor flaps on mine.. havent really had to much time to spend on it been getting my mr2 ready for SCCA next season :P

CalypsoGST

iTrader: (2)

she looks good thats my second fave color after Blue. I dont have many more pics of mine to show off.

GPTourer

I'm thinking I'm old enough that I want one of these now. Good luck with the build.

CalypsoGST

iTrader: (2)

I have one I windowed the block on if you want a decent chassis to start with.

s3xrapt0r

mandatory snow pics.. lol just got a set of fogs in the mail yesterday.. still waiting for my 3k hid kit for the fogs to get here... ill post back once they are installed.. im starting to really love my outlander.. i commute 70 miles a day im so glad i picked this up and put the mr2 in the garage for the winter

s3xrapt0r

installed my yellow fog lights.. i am going to be getting a 3k hid kit for them though.... the halogens they came with arent going to cut it especially with 6k hids in the headlights lol
i have a set of 17 inch eclipse meshies to install but i think i am going to look for a set of evo 8 enkeis.. i had the evo8 wheels on my probe gt and loved them.. ashame i didnt think to take them for my self and get a set of stock wheels before i sold the car.. they are hard to hunt down !

CalypsoGST

iTrader: (2)

Be careful if you are going to lower it with the evo 8 enkeis they will rub on sharp turns

s3xrapt0r

thanks for the heads up ! do they rub on the inside or the fender.. i have a fender roller if thats the case :P
also you interested in selling your outlanders suspension.. i remember you saying you blew your motor


new update:
ordered some new stuff..
3k hid kit for the fogs
light smoke head/tail light tint
a bit of 3m dinoc carbon vinyl to wrap my mitsubishi logos with..
a few feet of light smoke head/tail light vinyl to tint my lights with..

i should also be FINIALLY picking up my 17 inch 3g eclipse wheels off my friend sometime this week.. i need to get some of the curb rash out but nothing a little sanding and some paint cant fix.. ill need tires though... so not sure when im getting them on the car.. currently im working on my mr2 a bit and getting it ready for the spring

CalypsoGST

iTrader: (2)

on the inside wheel well. they only rubbed during extreme cornering though so youll be fine

s3xrapt0r

few more updates... got my 3k hid kit for my fogs.. slapped them in... also got a few feet of 3m di noc.. wrapped the mitsubishi emblems with it, still got alot left over so i may do some interior pieces or use it for something on my MR2

rong.

iTrader: (10)

we some updates!

apoopoo999

iTrader: (2)

any plans on an airtrek conversion?