When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You can use the outlander sport ones as well as the lancer/x ones. Once you remove th fake chrome, the wiring is back there. The lancer/x ones are slightly cheaper and they are somewhat different https://www.evolutionm.net/forums/ou...t-rvr-asx.html
Thanks for the link!! Now, I'm wondering since if these led side markets will cause hyper flashing? I'm assuming they won't because the car already had led side mirror markers.
So i own a 2017 Outlander sport and im looking to do tires like that and a few other mods can i just go up one tire size currenohave stock 225/55/18 looking to put on the geolander 235/60/18 can i do it
So i own a 2017 Outlander sport and im looking to do tires like that and a few other mods can i just go up one tire size currenohave stock 225/55/18 looking to put on the geolander 235/60/18 can i do it
love
[/QUOTE]
Going up a size like you mentioned shouldn't be a problem since you aren't increasing the diameter that much. I could be mistake, but I would measure the diameter of your current wheel/tire setup and then measure that up against the new tire diameter to make sure you don't rub. Nice OS by the way!!
Love your Outlander. I'm out in Toronto and I want a billboard for my outlander as well. Where did you get yours? I'm looking for a similar style to the police one in the front
Hey guys sorry been really busy with work. Wanted to post some updates on the OS. I removed the bull bar and the 20" RC led bar that was on it. I switched to one of those little license plate mounted bars. Its basic but it gave me a little more ground clearance. Im gunna make a full custom bullbar in the future that mounts through the slats in the lower grille though. I added some PIAA RF series yellow 6" LED light bars with it. Way better vision in the fog. I installed full LED fog lights and tinted them yellow with Laminx. Added a front skid plate, ARB awning, and ARB onboard air. Most striking is the snorkel. Its from a XJ Cherokee. It was easy to fab considering the OS fenders are plastic. Anyone with these tail lights will tell you the reverse light sucks. You cant see **** on the back up camera or anything behind you. I added a Rigid flush mount diffused LED for more visibility. Totally fixed the issue. I can see great now at night when I back up. I mounted it in the little panel for the rear fog light. Way smarter than making a hole in the rear bumper cover or tailgate. Here are some pics from the last few months. PIAA RF Series ION Yellow skiddin Rigid reverse ARB Air ARB Air ARB Air ARB Awning ARB Awning Snork Dork
Heck yeah mate! Looking killer, two now in the "Snorkel Squad" I see we have ours mounted a little different, I went a bit higher then yours as I have my fenders cut. Made install a bit of a pain. It could just be me but I honestly think I am averaging a bit better MPG's with the snorkel too. I then fully sealed the air box with a K&N air filter. I'm digging the ARB awning, have been looking into something similar. What skid plate is that if you don't mind sharing?
Hi, Neely. Did you change your tires? What size did you go for? Show us some pics.
Originally Posted by Neely
So i own a 2017 Outlander sport and im looking to do tires like that and a few other mods can i just go up one tire size currenohave stock 225/55/18 looking to put on the geolander 235/60/18 can i do it
TCSNYC - the Rough Country LED setup on the ROLA basket is exactly what I'd like to do on my vehicle. Would you mind sharing the mounting brackets that you used to connect the light bar to the basket, please? Thank you and great looking ride!
Love your Outlander. I'm out in Toronto and I want a billboard for my outlander as well. Where did you get yours? I'm looking for a similar style to the police one in the front
I am also in Toronto and have a Performance/Tire shop.
I could help you in finding right size Rims, Tires & Accessories in here.
Jul 10, 2018, 03:38 PM
I see we have ours mounted a little different, I went a bit higher then yours as I have my fenders cut. Made install a bit of a pain. It could just be me but I honestly think I am averaging a bit better MPG's with the snorkel too. I then fully sealed the air box with a K&N air filter. I'm digging the ARB awning, have been looking into something similar. What skid plate is that if you don't mind sharing? 
