KevinECSP's FCOTM Submission
Jun 20, 2017, 01:36 PM
#1
KevinECSP's July FCOTM Submission
Screen name or real name: KevinECSP
Location: Washington
Car Info: Car 2006 Mitsubishi Evolution GSR
Modifications:
English Racing 2.4L LR engine: Wiseco HD 2.4LR pistons, Oliver 156mm rods, Eagle 100mm crank, ARP main studs, ACL race bearings, L19 head studs, AEM cam gear, GSC: S2 Cams, Valve springs, and lifters.
Forced Performance 84mm compressor cover, JM Fab 4” intake, Perrin 4.5” foam filter, Speed Density conversion using an Omni 4 bar MAP sensor, ETS upper and lower IC pipe, ETS 3.5” wide tank FMIC, Tial 50mm BOV, Cusco heat shield, Forced Performance 18psi internal wastegate, JMFab hood-exit O2 dump, Megan 3” downpipe, HKS testpipe, HKS 3” C/F Ti exhaust, Walbro 255lph HP, Agency Power front motor mount, Ingalls engine torque dampener, SpoolinUp COP, AMS mini battery.
Touge Factory Special Edition Matte Black Enkie NT-03M 18x9.5 +27 wheels, Buddy Club D2 coilovers , Competition Clutch Stage 2 (unsprung), MAP steel braided clutch line, AMS shifter base bushings, AMS transmission shifter bushings, Goodridge SS brake lines, DC Sports titanium rear strut bar.
Evo 8 Nose-chopped bumper w/Rexpeed D-style CF lip, JDM rear bumper w/Rexpeed CF extensions, Rexpeed CF side skirts, JDM Evo VII taillights, LHTuning replica Voltex 5V wing w/Voltex 30mm risers, JDM headlights.
Future plans: None, saving up (or trying to) for a house!
Other info: I have won a couple of car show awards, but my biggest accomplishment with my car was being featured in the Forza Horizon 3 commercial. I was fortunate enough to be chosen and included in a couple of different scenes. Cherry on the cake, the professional stunt driver of my car while filming the scenes was Ken Gushi.
IMG_5892 by Kevin O'Rourke, on Flickr
IMG_5923 by Kevin O'Rourke, on Flickr
IMG_4785 by Kevin O'Rourke, on Flickr
IMG_4668 by Kevin O'Rourke, on Flickr
IMG_0066 by Kevin O'Rourke, on Flickr
IMG_0069 by Kevin O'Rourke, on Flickr
Location: Washington
Car Info: Car 2006 Mitsubishi Evolution GSR
Modifications:
English Racing 2.4L LR engine: Wiseco HD 2.4LR pistons, Oliver 156mm rods, Eagle 100mm crank, ARP main studs, ACL race bearings, L19 head studs, AEM cam gear, GSC: S2 Cams, Valve springs, and lifters.
Forced Performance 84mm compressor cover, JM Fab 4” intake, Perrin 4.5” foam filter, Speed Density conversion using an Omni 4 bar MAP sensor, ETS upper and lower IC pipe, ETS 3.5” wide tank FMIC, Tial 50mm BOV, Cusco heat shield, Forced Performance 18psi internal wastegate, JMFab hood-exit O2 dump, Megan 3” downpipe, HKS testpipe, HKS 3” C/F Ti exhaust, Walbro 255lph HP, Agency Power front motor mount, Ingalls engine torque dampener, SpoolinUp COP, AMS mini battery.
Touge Factory Special Edition Matte Black Enkie NT-03M 18x9.5 +27 wheels, Buddy Club D2 coilovers , Competition Clutch Stage 2 (unsprung), MAP steel braided clutch line, AMS shifter base bushings, AMS transmission shifter bushings, Goodridge SS brake lines, DC Sports titanium rear strut bar.
Evo 8 Nose-chopped bumper w/Rexpeed D-style CF lip, JDM rear bumper w/Rexpeed CF extensions, Rexpeed CF side skirts, JDM Evo VII taillights, LHTuning replica Voltex 5V wing w/Voltex 30mm risers, JDM headlights.
Future plans: None, saving up (or trying to) for a house!
Other info: I have won a couple of car show awards, but my biggest accomplishment with my car was being featured in the Forza Horizon 3 commercial. I was fortunate enough to be chosen and included in a couple of different scenes. Cherry on the cake, the professional stunt driver of my car while filming the scenes was Ken Gushi.
IMG_5892 by Kevin O'Rourke, on Flickr
IMG_5923 by Kevin O'Rourke, on Flickr
IMG_4785 by Kevin O'Rourke, on Flickr
IMG_4668 by Kevin O'Rourke, on Flickr
IMG_0066 by Kevin O'Rourke, on Flickr
IMG_0069 by Kevin O'Rourke, on Flickr
Last edited by KevinECSP; Jun 20, 2017 at 07:04 PM.
Thread
Thread Starter
Forum
Replies
Last Post