![]() |
I had to redo the datasettings xml for evoscan and I noticed that trans temp is logged off of can28-0. I looked at some of the other evo X xmlfiles and it's the same. So if you were to take say TPS can1-2 and plug it into the ra evox xml, it should work? I'll try in the morning, just curious to see if this worked for anyone else.
|
Does anyone have the address for target boost. 2009 USDM RA 53600010:)
|
See if it's the same as for 53600009....
53600009: RequestID 23808b63 Boost Target Eval: x*0.19347 ResponseBytes: 1 If that doesn't work, let me know and I'll look it up for ya. Rich |
Thank you! I will verify this as soon as I can and let you know
|
Does anyone happen to have the logging addresses for TRT_TPS, TL_TP?
And that's for 53600010 |
I'm not sure if you have, but DL the new files from GoldenEvo, yes for both EcuFlash and EvoScan.
|
Originally Posted by AWDralliart09
(Post 10277338)
Does anyone happen to have the logging addresses for TRT_TPS, TL_TP?
And that's for 53600010 TPS_TRT 2-byte variable 238095aa x*0.03052503 TPS_TL 2-byte variable 23809cf0 x*0.03052503 Don't be surprised when TPS_TL seems to act all crazy. It follows TPS, except for when it doesn't. ;) And to anyone wondering what these are, they are super-obscure. They show the "x" axis used by the ECU to look up "SST Throttle Requested Torque" and "SST Torque Limit" tables respectively. You don't need them unless you're neck-deep in SST tuning quicksand... Remember AWDRalliart09, the more you struggle, the deeper you sink! :lol: Rich |
Originally Posted by richardjh
(Post 10277664)
Remember AWDRalliart09, the more you struggle, the deeper you sink! :lol: Rich LOL,, I will keep myself anchored.. Rich I'm not using these yet, just wanted to be in the game following along. learning |
*edit* nevermind figured it out
|
Someone can help me for logging maf voltage in 53610010 rom?.
I tried with different values with no results:( |
Does anyone know how to convert these to work with the android app Torque?
|
Originally Posted by dan-lincs
(Post 11707549)
Does anyone know how to convert these to work with the android app Torque?
|
Does that App let you manually enter addresses and formulas similar to evoscan? IE use it to log WB Rear O2 voltage and convert to AFR.
|
You can do that if you know the exact address of the info you are looking to poll.
|
All times are GMT -7. The time now is 03:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands