![]() |
If you are close to Edmunton town just go and pick it up at the warehouse and you save shipping , it seems like you are saving anyways by picking it up at the dealers place.
Originally Posted by vince126
(Post 7719785)
i found a distributor in Edmonton that will ship amsoil stuff :X unfortunately it was too late, i already bought the MT90 and MTL from lordco with a good discount. I still wished i went with Amsoil instead, but Redline is fine.
BUT i ordered the Amsoil severe gear, got to my door for 30$ : / 12$ shipping is a little crazy. I was more worried about my Transfer case than the transmission since i still have the clutch pill in. i just contacted lancershop and im sending them the money tonight :) now all i need is the Amsoil filter! Apagan you are just sneaky, popping up all over the place. |
Originally Posted by 007WRX
(Post 7720069)
I have the HKS Hybrid filter in mine. Noticed a little increase in noise.
Random shot: http://farm3.static.flickr.com/2602/...44aca439_o.jpg How much was it mind me asking? |
Just throwing it out there (since a amsoil representative is here), I am currently running the signature series 0-30 amsoil for my Evo X. Since its thinner, I notice the engine seem to rev easier and at the same time I got better mileage. Then again I got a tune around the same time as well, but still, I am getting better mileage then my friends with the same tune ;). I like this oil because its thin and yet it provides all the protection of, what I assume, thicker grade oil. It also helps with the cold Canadian winter :)
|
Originally Posted by 007WRX
(Post 7720069)
I have the HKS Hybrid filter in mine. Noticed a little increase in noise.
Random shot: http://farm3.static.flickr.com/2602/...44aca439_o.jpg i have the Works Drop-in filter, i'll probably put that up for sale when i put my Amsoil on. i just wanna hear more noise lol, i miss the sound of the 18g and Cobb Short ram intake. |
I really want to do a header with an external wastegate on the evo. I have yet to find someone who offers this for the stock turbo.
|
thats the thing i noticed with Evos lately, theres not a lot of EWG setups unless you venture towards gt30, 35R turbos. you can get almost same amount of power with FP Red...and its internally gated, and spools 20+psi by 3800 which makes it awesome street driven car. i like to see what an HTA red or HTA Green spools! :)
the stock IX turbo is pretty damn good already, capable of running 25psi all day internally gated, any more than that its just blowing hot air and shortening the life of it, might as well upgrade. Ive seen a lot of people pusing 29psi on E85 with stock turbo IWG, but i dont know how long it will last. Big Al from Dynoflash did a study of the EWG and Stock turbo a while back, i havent read through it yet so i dont know how relavant it is to your question lol https://www.evolutionm.net/forums/ev...-turbo-ix.html |
Nice milage Ryan, and it comes with a JDM rear bumper awsome
|
Originally Posted by vince126
(Post 7721067)
thats the thing i noticed with Evos lately, theres not a lot of EWG setups unless you venture towards gt30, 35R turbos. you can get almost same amount of power with FP Red...and its internally gated, and spools 20+psi by 3800 which makes it awesome street driven car. i like to see what an HTA red or HTA Green spools! :)
the stock IX turbo is pretty damn good already, capable of running 25psi all day internally gated, any more than that its just blowing hot air and shortening the life of it, might as well upgrade. Ive seen a lot of people pusing 29psi on E85 with stock turbo IWG, but i dont know how long it will last. Big Al from Dynoflash did a study of the EWG and Stock turbo a while back, i havent read through it yet so i dont know how relavant it is to your question lol https://www.evolutionm.net/forums/ev...-turbo-ix.html |
This is what I want:
http://www.maperformance.com/gallery...es/evodump.jpg http://www.maperformance.com/gallery...s/evodump3.jpg MA Performance Stainless steel o2 housing with external dump. Sick. |
can someone school me about those?
what does it mean by external dump? which part connects to the cat/test pipe to he cat back? |
The open tube (Second picture, bottom tube) is on the wastegate side of the turbo, and the other tube with the flange connects to your downpipe. When your wastegate opens on your turbo, normally it stays within the o2 housing/downpipe joining the airflow with the rest of the exhaust system. With the external dump tube for the wastegate, the exhaust gases go to atmosphere allowing less restriction, better boost control, less chance of boost creep (think open exhaust), and a handfull of other benefits. It's also quite a bit louder once the wastegate opens.
Does that help at all? |
yes it does.
thanks. technically, can we have that in our evos for street or is used for off road only? i watched the video in the map website. its quite loud. edit: sorry it wasnt in their website. it was in the Vendor Section: http://www.youtube.com/watch?v=xMY3dx4hta8 |
Where is this video?
I'd like to do that or do the proper route with the o2 external wastegate downpipe combo, but thats a little bit more money. Technically it's illegal to modify at all ;) |
External WG = LOUD haha i have a friend with a black subby with HKS turbo and External WG ...i love the sound i admit it
|
Ya man, for sure. I'd like to slap one of those o2 housings on there, but I'm not sure if I would need a tune or not.
|
| All times are GMT -7. The time now is 03:21 PM. |
© 2026 MH Sub I, LLC dba Internet Brands