1 Attachment(s)
Not sure I can see those tables, will check later when I get the laptop.
I did notice the injector latencies were different between roms... What about swapping to 88580714? ISCV idle tables |
Do you have a Patch For MAF sensor, I wanna delete the MAF... (Just Trying to tune with MAP)
|
Originally Posted by hilaloruc
(Post 10334618)
Do you have a Patch For MAF sensor, I wanna delete the MAF... (Just Trying to tune with MAP)
|
hey guys, have few questions about NLTS
can anyone explain the functions of NLTS load and speed thresholds ? why they say speed/load must be UNDER this values to activate nlts. and there are 30/150 in these tables accordingly shouldn't there be stated 'ABOVE' in these tables or I have some faulty defination file ? using 96530706 |
Originally Posted by stunt2
(Post 10337586)
hey guys, have few questions about NLTS
can anyone explain the functions of NLTS load and speed thresholds ? why they say speed/load must be UNDER this values to activate nlts. and there are 30/150 in these tables accordingly shouldn't there be stated 'ABOVE' in these tables or I have some faulty defination file ? using 96530706 |
Yes it's suposed to say "above", not "under" I changed it in my own xml.
|
Is there any way to change the inherit rom? I've had this happen a couple times where I'll tune an Evo on Tephra, then when I go back to open the rom later and the Tephra options are no long there and it's inherit rom is the evobase rom and not Tephra. It doesn't happen all the time, so I'm not sure what's going on. Anyone else have this happen?
Thanks! ~Chris@MooreAutomotive |
just change the inherit code in the XML for that ROM
cheers |
Question about flashing Tephra roms....
I have seen on some posts that some versions of ECUflash cause problems with flashing these roms. I have been using Evoscan v2.8 to flash my current rom. Will there be any problems in flashing a Tephra rom with Evoscan? Thank you! |
iv used many versions of ECUFlash and EvoScan and never had an issue flashing Tephra roms. I think most issues are either car or cable related.
cheers |
Originally Posted by 07EvoIX
(Post 10349135)
iv used many versions of ECUFlash and EvoScan and never had an issue flashing Tephra roms. I think most issues are either car or cable related.
cheers |
Originally Posted by 07EvoIX
(Post 10347973)
just change the inherit code in the XML for that ROM
cheers How do you do that? You mean in the definition xml? Thanks! ~Chris@MooreAutomotive |
open the XML in notepad (or similar), about 10ish lines down you will see the <inherit> code. You can adjust the inherit there. type the filename (without '.xml') that you wnat to inherit.
though if you are saying it doesnt happen all the time, i would try reinstall the program. cheers |
I must say I very much love this rom mod. Car feels smoother and with all the resolution in the big maps it's a lot easier to tune the transitions, especially tip-in.
Thank you to all the EvoM elite, especially Tephra. |
Woot cant wait going v7 this week. thanks for all ur work to help out this community
|
All times are GMT -7. The time now is 04:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands