Hello
 

I just donated, I would like the evo 7

ok the rom that ur trying to DL from ur evo.. was the car tuned??

Hey
 

I want to delete my maf

90556701 XML wanted
 

... I posted this in a thread "90556701 v7" as well...

Hello, I would like to convert to SD and this (90556701) prob is the best rom, now using tephra V7 90550701 or 90552701.

Where do I get the 90556701.xml?
Is it donate David?
Or is it "somewhere"?

Thanks for your help.
Cheers

Is there V7 for 99860002?

^up, still needing 90556701.
(Have no problems donating - just need to know it's properly available. In the past, this was much easier. I guess has to do with retirement:))

Anyone have the most complete XML for the 90550701.
The file attached is the one I have in addition to the one supplied with the rom.

05 evo 8 need help
 

Hi there I'm very new to this evo things .
so I have this 05 evo 8 looking to get tune or start tune I've read many formrum and I still confused of how the mods work so is there anyone can help me out on how the mod the Rom and use it the Data log and such.
I do my 2.0 openport
My English is not the good
Thanks

I suggest you watch all 16 videos and read the link below.

https://www.evolutionm.net/forums/ec...-tune-evo.html

Hi tephra. I just donated. Could please send me a jdm evo 7 rom with Speed Density. Thanks in advance.

Huge thanks to everyone that contributed to this, it's absolutely amazing!
I'm on the 96531706 rom, i'm just mindblown at how quick it is to get running, and it idles and drives incredibly smooth, even on out-of-the-box settings.

Had to do the minimum ipw mod to get reasonable pump-gas AFR's on ID2000's (and i think it'd be a great thing to add to the xml's standard), but it just WORKS!

Thank you!!

"96531706" is the best.

Hi guys

I have sent a donation to tephra a while ago in regards to a rom that I'm looking for.

Rom I need is 88581713 for ADM Evo 9 With speed density.

Iv sent messages to tephra but his inbox is full. Does anyone have the above rom? Or can help me.


Kind regards
Jimmy

Any specific reason you need that number and cannot use a 8859 varient?

First post has the 88591715 3d SD Rom that suits your car.

https://www.evolutionm.net/forums/ec...bles-baro.html

Hey guys Im in the process of a new build and curious if anyone could check out my rom ive been putting together.

A couple things to know. With the new build I had to get a new harness or the shop i had doing to work did anyway. The harness I ended up getting has no maf plug and I have no maf kicking around anyway in order to run car regularly.

So I need to run Speed Density to start off. I have the GM IAT sensor wired in to the maf wires. I am also running the Omni 4 bar MAP sensor.

Also had to find another ECU after the shop had already told me my original ecu was junk for what ever reason. They then went and got another ecu but were still not able to get car to start.

So I diagnosed the car with a friend after pulling it out of shop and came to a junk ecu again. Most likely because we found main grounds not connected by ECU and them cranking the car over constantly.

Now I just trying to make sure I have all the Speed Density settings correct along with the MAP sensor values which I am having a hard time locating actually.

Let me know what you guys think. I could start a new thread but just trying to get as many eyes on it as possible. Really like to hear this thing start sometime. lol.