|
Originally Posted by phenem
(Post 7597467)
Mine does open off screen and I have to drag over to see the pane and I can move it around and everything. Sounds like a video card issue on your end.
...back on topic. Is there a way to use the intercooler sprayer button for it's original purpose? I think I may be one of the few folks who use it regularly (sitting in grid at autocross). d |
The ICS still keeps its original functions.
|
Originally Posted by Jack_of_Trades
(Post 7598038)
The ICS still keeps its original functions.
d |
I assume all the boost control mods will work with this just fine? Psi direct control, mrfred 2 byte load based?
|
Originally Posted by mlocatel
(Post 7597255)
Hello Tephra
the EDM fraction will be very grateful to see you add the 88840017 to your list in the first post :D{thumbup} regards mlocatel Bump for this also mate. Just don`t forget about us Dave. Cheers |
Any USDM 8 should be able to run the second map without any trouble and pass emissions and everything. Just to make sure I'm clear on this, the 96530706 ROM will replace any ROM in the 9417xxxx series, correct? Gotta catch up, I'm still on Tephra 5.1; I am sooo far behind. :mitsu: |
Originally Posted by Jim in Tucson
(Post 7598191)
Noob here...
Just to make sure I'm clear on this, the 96530706 ROM will replace any ROM in the 9417xxxx series, correct? Gotta catch up, I'm still on Tephra 5.1; I am sooo far behind. :mitsu: |
The fuel maps should be moved out of the normal area right? Everything looked to be a little shaken up but the big maps are beautiful. I can't wait to start playing with it.{thumbup}
|
Originally Posted by Jack_of_Trades
(Post 7597965)
|
Nice work! Eagerly awaiting 88590015!
|
I know we need to copy over the immob. code but do we alter the int. code as well or leave as is? Sorry for the noob question. Also I do not see maf scaling am I using the wrong one? Is the maf comp. table it?
|
Originally Posted by mt057
(Post 7598430)
I know we need to copy over the immob. code but do we alter the int. code as well or leave as is? Sorry for the noob question.
That is the USDM value. |
Suggest including note in OP release notes that BIG MAP feature now supports 25 RPM * 30 Load cells
|
1 Attachment(s)
Here is a sample layout of MrFred's PSI based boost tables added to the basic 96530706 XML if anyone wants to take a peek and give suggestions.
LINK |
I am updating my distributions with this new XML info, great job JoT! {thumbup}
|
| All times are GMT -7. The time now is 02:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands