EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
Page 2 of 80
1
2
3
4
5
6
12
52
Last »
Show 100 post(s) from this thread on one page

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo Engine / Turbo / Drivetrain (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain-22/)
-   -   How much power will my setup make [Mega Merge] (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/459017-how-much-power-will-my-setup-make-mega-merge.html)

supersal Nov 19, 2009 12:02 PM
Originally Posted by mannerism (Post 7722823)
yeah tuning would be very difficult and challenging. so any answers to what i asked?
About 700HP on good fuel and decent boost...

.

mannerism Nov 19, 2009 04:19 PM
can anybody tell me that if there a 700hp 6speed car and the person converts it to 5 speed than does it make a lot of difference? a little explanation would help.

mannerism Nov 21, 2009 11:23 AM
bump

zedevo Nov 21, 2009 03:18 PM
The PTE 6265 is the same like HTA86 ? Same specs ???

Sharkbite2000 Nov 21, 2009 03:27 PM
My guess with that long list of part's you have 1000hp just around there.

scorke Nov 21, 2009 03:34 PM
Originally Posted by Sharkbite2000 (Post 7731674)
My guess with that long list of part's you have 1000hp just around there.
lol

Shark are you really selling it?

Scorke

Sharkbite2000 Nov 21, 2009 03:36 PM
Originally Posted by scorke (Post 7731690)
lol

Shark are you really selling it?

Scorke
Would like to move on to a new project, but if she doesn't sell, I'll just keep enjoy it {thumbup}

mannerism Nov 27, 2009 05:19 PM
Originally Posted by mannerism (Post 7726385)
can anybody tell me that if there a 700hp 6speed car and the person converts it to 5 speed than does it make a lot of difference? a little explanation would help.
??

detroit pistins Nov 29, 2009 07:22 PM
take a shot at this setup:)

80mm red
ppi ported ex manni
walboro + 950cc
3'' br tbe (catless)
4'' ic kit
map o2 dump
perrin intake
mbc @ 23 psi with 93 oct

edit: more info added

06MREvo Nov 29, 2009 07:32 PM
Originally Posted by detroit pistins (Post 7752806)
take a shot at this setup:)

80mm red
ppi ported ex manni
walboro + 950cc
3'' br tbe (no cat)
4'' ic kit
map o2 dump
perrin intake
mbc @ 23 psi
you bought a red???

That setup on Epic's dyno...probably around 400whp with stock cams...

JohnBradley Nov 29, 2009 07:32 PM
Originally Posted by mannerism (Post 7748610)
??
No, there is no extra loss or gain switching from a 6 speed to a 5 speed. All you gain is reliability.

JohnBradley Nov 29, 2009 07:34 PM
Originally Posted by detroit pistins (Post 7752806)
take a shot at this setup:)

80mm red
ppi ported ex manni
walboro + 950cc
3'' br tbe (no cat)
4'' ic kit
map o2 dump
perrin intake
mbc @ 23 psi
On a dynojet, mid to high 300s at 23psi. I dont normally see over 400whp until past 26psi.

Example-

https://www.evolutionm.net/forums/ev...sh-racing.html

This one was at 27ish despite the report by the owner it was 26.

06MREvo Nov 29, 2009 07:44 PM
Originally Posted by 06MREvo (Post 7752833)
you bought a red???

That setup on Epic's dyno...probably around 400whp with stock cams...
Edit: 23 psi??? Come on man...You have headstuds too...run at least 26psi with that setup...

detroit pistins Nov 29, 2009 07:49 PM
Originally Posted by 06MREvo (Post 7752833)
you bought a red???

That setup on Epic's dyno...probably around 400whp with stock cams...
no i don't have it :( just yet, but just trying to get some opinions on what it would do at @ 23.

JohnBradley Nov 29, 2009 07:53 PM
I am curious as to why 23psi? Seems to be a benchmark these days, just not sure why :)


All times are GMT -7. The time now is 01:04 PM.
Page 2 of 80
1
2
3
4
5
6
12
52
Last »
Show 100 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands