My seat disintegrated.

well, mine like where the fabric is meating the plastic... the little clips are comming off. but they arent spreading.. so its all good =]

Don't feel too bad folks. I've seen the seatback (which is STITCHED) fall off of a B5 Audi S4 that only had about 36K on the odometer.

Though I do expect this stuff. It is a Mitsu after all, and apparently they skimped on a few things (like the recirculating valve...) to keep costs down here.

The area on the driver side cushion under my left thigh is starting to look worn and the plastic seatback cracked and was replaced under warranty. Before the warranty goes up I'm gonna ask them to replace the cushion part. I will post a picture if I can.

Well the little decorative (if there is a functionality i dont know it LOL) holes in the center of the back fell out...had to pop those back in (i think that was from passengers in the back tho. And the fabric clip things ppl are talking about are coming out of mine too...i wasn't aware i could click em back in woohoo! fixin the seats when it comes back from the shop HAHA.

The exact thing happened to my RA and she only has 8k miles on her, I tried fixing it but it won't stay on, im gonna let mitsu fix it... :lol:

I've never had a problem with these cars. I guess I am just lucky. Even after my first Evo was totaled (hit a tree square in the center of the trunk at about 65 MPH along with a bunch of other impacts), it still didn't break the seats in any way. They still slid all the way in each direction on the sliders, and the seatbacks still adjusted forward and backward.

Very strange.

maybe i'm just lucky, but in my '03 evo which i traded in (15,000 miles), i have had no seat problems whatsoever. same with my new MR (1500 miles), they feel very solid.

But i'm not surprised at a couple seats breaking....cornering at 120mph puts a lot of gs on those buckets!:D

my driver side seat the bolster part is in 2 piece, the foam part.

anyway, I may try the dealer. I'm sure they'll say it's normal wear and tear.

Anyway, i know how it happened. the tech always sit there on it when they work on my car, like oil change or dealer flash. Bastards.

I had the same problem with the side of my driver's seat coming undone. There's an easy fix for this. The next time it comes off, you should hammer the metal tab underneath before sliding it back in. This will make it a lot tighter and will hold the plastic rail in place. I've never had a problem since. {thumbup}

Seats are fine but the damn cloth on the door came out alittle bit the other day. (right under the thing you use to pull the door close)

Yup, And it sucks!!!!

I'm in the process of losing weight so I don't damage my seats :lol:

The only problem with mine is that the stiching is comming off the so the cloth is loose.

mine broke awhile ago, but I avoid the dealer like the plauge, so I will not be going back to get it fixed