i need denso iridiums.. but i dont know what part number is the one for the 2003 lancer oz rally edition.. please help thanks!

We use the NGK plugs at our dealership (BKR5E-11) which are part #MS851357. I don't know which are the Densos, but the other plugs that are suited for use by the factory are RC10YC4 (MD350292) and K16PR-U11 (MS851727)

densos
 

what part number of the denso's should i get for my 2003 lancer oz rally edition?

thanks!

Ask your local dealer which of the other part numbers is the Denso. Or find a store that sells Denso plugs, and ask for Denso plugs for your OZ.

NE1 know the part number for the aforementioned stamped vent piece ... and is it available unpainted?

'twould appear to be MN126274, "Insulator, Hood". It looks like it covers the hood vent and acts as an underhood heat shield. Don't know price, not at work.

MN126274 MSRP is $86.32, MP.Net has it for $69

how about the calipers (front) had a little run in with the steam cleaner, seems the clear coat on the calipers didnt like the heat, no more clear coat.. melted

MR475929 Left
MR475930 Right

The hose connected to the boost solinoid. The one with the restrictor pill.

Thanks!

Flybyevo...

I need a front license plate that says Lancer Evolution, would you know of one?

Two useful part numbers and their distinction:

MZ598263EX - CD Changer Install kit (converts lower tray to DIN panel, comes with rails to accomodate stock radio)

MR626799 (black) - Lower DIN panel (same panel as above, but WITHOUT the rails ... much cheaper and works with aftermarket radios ... worked great with my Alpine :D )

l8r)

i need help . i have a crecking noise from the front left of the car. i have changed the anti roll bar bushes and that nearly stopped it but it comes back after the car has done about ten miles. does any one know what will stop this.
thanks steve

before asking for a part number...

check here

https://www.evolutionm.net/forums/sh...ad.php?t=82265