put new stock tech rotors on.

Getting the RS ready for the shootout

https://scontent-a-lga.xx.fbcdn.net/...14238785_n.jpg

-Ethan

Attachment 274439

Attachment 274440

Attachment 274441

Attachment 274442

Almost done!

Finally got around to building my mock up frame for the skid plate. Will skin it this weekend hopefully, then decide if I want to make a final one out of aluminum or just a more refined steel one. Depends on the weight and final design of course.

https://www.evolutionm.net/forums/at...1&d=1405129832

Threw some wax on it too. And got paid to do all of it. Sometimes I like when work is slow.

Installed a MAP Performance cam angle sensor shield

Are those really necessary? I know you just installed one so I'm not expecting you to say no lol but am I "missing the boat" by not using one?

Keep us posted, I'm thinking of doing nose chop as well. Gl

Nothing special done to my evo today. Just a wash n wax...

If you have an aftermarket exhaust manifold, yes. Some of them will roast the cam sensor. Stock exhaust manifold, not really.

Homemade Double pumper install
http://i1289.photobucket.com/albums/...psa626888b.jpg
http://i1289.photobucket.com/albums/...ps70a433da.jpg

lets try this again
Attachment 274438

yeah my tubulars get really effing hot and the distance between them and the cam sensor is probably 2" at most

Will do. Should be all done tomorrow or tues. :)

Decided to pay 500$ for a detail for the So Cal Mod.

Going to by a Rupes buffer and do it myself next time. Pay for itself after one detail.

She is clean. Couldn't look at it in the sun. Amazing how yellow the clear was. And I take care of it. Wash, clay wax and keep her in the garage.

https://farm6.staticflickr.com/5481/...44fd9560ff.jpg
image by Uscbryan, on Flickr

https://farm4.staticflickr.com/3849/...abfac01906.jpg
image by Uscbryan, on Flickr

https://farm4.staticflickr.com/3926/...49e6abe9b7.jpg
image by Uscbryan, on Flickr