Fought with this thing

https://cimg3.ibsrv.net/gimg/www.evo...19749b242f.jpg
https://cimg4.ibsrv.net/gimg/www.evo...dad252ff07.jpg

:lol:

That thing has seen so many thread miles... I've done frequent suspension swaps in the past year :(. one good news is 14mm bolts are plenty and are free from the salvage yard. I was trying to make it to an autox tomorrow

https://cimg6.ibsrv.net/gimg/www.evo...5638d90aca.jpg

made custom cell phone mount

https://cimg9.ibsrv.net/gimg/www.evo...23253f4861.jpg
https://cimg4.ibsrv.net/gimg/www.evo...6b5e0f63ce.jpg
https://cimg8.ibsrv.net/gimg/www.evo...c5e6729371.jpg
https://cimg9.ibsrv.net/gimg/www.evo...270ae0ac15.jpg

Interior Lighting
 

Added to my interior lighting.

https://cimg9.ibsrv.net/gimg/www.evo...1d13ac13c.jpeg
https://cimg1.ibsrv.net/gimg/www.evo...61b8f0f89.jpeg

And rewired my engine lights onto one interior switch.
https://cimg5.ibsrv.net/gimg/www.evo...cb3a078ef.jpeg
https://cimg8.ibsrv.net/gimg/www.evo...401e35b49.jpeg

I need one. let me see what I can cook up tomorrow :)

Sold some parts that I've been hoarding. Clutch is gone. CF driveshaft that's currently on car, one of the wings, and the dry carbon trunk should be gone this weekend.
I'm up about $3500 so far. Should have parted this thing out long ago. :lol:

How did you affix it to the radio cage? screws? very nice

thanks. yeah, you can see the holes lined up in the first pic. i used short screws with washers on each side, and nylon locking nuts so they won't back out and fall into the radio circuitry.

https://cimg9.ibsrv.net/gimg/www.evo...270bb16f96.jpg

245? :)

Yep.. I want to compete in local SCCA this year and only had funds for tires (wheels are stock spec). Next year 10.5 with 275s will come.

I love these tires. my 2022 rears are still fresh and are now my fronts, until i'm done my best dialing in the new parts

meh. I think i'm done messing with my air intake area. for now lol
https://cimg7.ibsrv.net/gimg/www.evo...0c27b9aee7.jpg

as for the phone mount, this looks like the best location for me. my clock is always wrong anyway, good spot for recording too. I'm going to need a longer ball joint (sorry for the pic. I used the kid's tablet)

https://cimg6.ibsrv.net/gimg/www.evo...d55eff1914.jpg

This is what I did for a phone mount. I used the bolts that hold the radio in to mount it. Its nice because its out of the way of the gauges but still in reach.