I'm interested as well. If the price is right of course.

^^ive been looking for one too

PM me what you think would be a reasonable price! This would be so in the design process i could try to hit that price point! Please remember this will not be a mass produced part right off so the price will be higher than a production unit! Thanks, Trever

Well depends. If you had a reserve of core shifters you could have a swap policy. Send me one I'll send you back my old one. Then you wouldn't have to add into the mix the cost of a new shifter assembly which I'm sure is bank from mitsu. However you do it though, I've wanted a shorter throw since I've bought the evo bu I've learned to live with it.

plz ban jdmevo206 he is bumping threads for no reason to get his post count up.

very interested to see the end result of this project and you offer ur services for the right price i'd pick one up instantly :thumbup:

Shifter is scheduled to be here tomorrow! Im hoping to make very quick work of it to get the prototype in my car!

Also for production i will not need cores (at least if all goes as planed) it will be a complete shifting lever! Completely machined out of aluminum and stainless steel! (Aluminum for the reverse lock out ring and stainless for the lever)

Keep the interests and suggestions coming!

Also let me hijack my own thread (I think thats allowed seince its my thread right LOL)

I am looking for a tuner to tune my car Speed Density! Does anyone know of anyone good? Preferably with in 4hrs of Poughkeepsie NY

Also i am looking to do all of my cars pipes! Intake, Intercooler and Upper and Lower Intercooler Pipes, Down Pipe, Down Pipe Back Exhaust! What do you recommend? Please speak from experience!

just got under hood bushings, what a difference..........

I know STM is in Rochester dont know how close that is to poughkeepsie.

STM Will tune Speed Density?

Also what are all of your thoughts (from experience) on my piping?

Thanks Guys

Shifter arrived today! This is going to be harder than i thought! All the movement takes place ABOVE the pivot point! Like no other shifter i have ever seen! I can shorten it for looks and a slightly shorter throw altho any more than this is going to take so real thinking on my part! We'll see how it goes!

If it was easy, There would have been one made already.

Keep us updated. I hope this works out.

Oh it will work out! If i say im going to do it I always do! Sometimes it takes a while but i always get it done! The only problem i see is making production pieces. Sure if i complete one for myself i could do the same for you. But this shifter is worth a LOT to me so i am going to spend what it takes! So it might be expensive!

Let me know what ya think for pipes for the car! Come on guys help a brother out!

any update on this??