|
just left you a msg on your cell
|
Originally Posted by AlwaysinBoost
(Post 8104074)
Doug, PCA has event for $150 for the day, that give you 5 - 25 minute sessions.
Pete, pull the wheel off. you'll see a rubber grommet on the brake disc. pull that out. now spin the wheel so that hole the grommet was covering is at the 6 o'clock position. there will be a little wheel with teeth facing you that you should just be able to see. using a flat head screw driver, you want to turn that little wheel towards you to bring the shoes inward. it might take several turns until the shoes release the disc. when you reinstall you want to turn the wheel away from you until the shoes contact the disc, then back if off a turn or two. you should do this for BOTH sides. now your ebrake is setup perfectly. if you don't follow my text just call me and I'll explain it.
Originally Posted by grillpt
(Post 8104096)
Can you pm me your # again so I have it Marc, thanks. I was wondering what the that gromet was for.... :lol:
|
Originally Posted by AlwaysinBoost
(Post 8104126)
just left you a msg on your cell
Originally Posted by Jeffroevoix
(Post 8104127)
Knowledge is power. I just use heat and hammers:crap: PCA site is a pain, I hate internets
Pete do you have all corners to do or just the rears? |
One of the locals in NJ bought a roller recently. I could borrow it off him, and we could knock out a few cars in one day! We cann throw him a few bucks!
|
Originally Posted by grillpt
(Post 8104156)
thanks brotha!
Jeff, I only have to do the pass rear, all the other were no problem. Tell you what, I'm gonna give this method a shot before we got torching the hell out of it... Turns out Im a riesentoter. {thumbup} Anybody know what riesentoter means?:confused: |
Originally Posted by chu
(Post 8104157)
One of the locals in NJ bought a roller recently. I could borrow it off him, and we could knock out a few cars in one day! We cann throw him a few bucks!
|
Originally Posted by Jeffroevoix
(Post 8104167)
Lmk how it works cause I will be doing all corners soon.
Turns out Im a riesentoter. {thumbup} Anybody know what riesentoter means?:confused: |
Originally Posted by Its a 7
(Post 8104241)
A friend of mine with a mazdaspeed miata just mentioned he needed it done and didn't know who had one so if you guys go that route LMK.
|
Thats what PCA calls our region. All the others are normal like "central PA, Delaware, Chesapeake, pocono...........we get riesentoter
Giant Killer sounds much cooler{thumbup} |
Originally Posted by chu
(Post 8104157)
One of the locals in NJ bought a roller recently. I could borrow it off him, and we could knock out a few cars in one day! We cann throw him a few bucks!
I need to get 2 new sets of springs ordered, some spacers/extended lugs, and get all that installed (with top mounts Petey!) topped off with a nice alignment and corner balance. Don't really know when the rolling should come in, I'm assuming to get the geometry setup w/o spacers, then throw em on and we can go to town :D Def don't wanna go too hasty on the rear quarters if I don't have to. Fun stuff |
sandmonster email me pics of your car, redoing my website and want yours on the main page.
|
Damn Ray, you sure make everyone else's cars sound like a pos
|
Originally Posted by chu
(Post 8104358)
Damn Ray, you sure make everyone else's cars sound like a pos
|
link to said site?
|
|
| All times are GMT -7. The time now is 09:54 PM. |
© 2026 MH Sub I, LLC dba Internet Brands