Yeah it has not but I'm use to having it so I got another lol car needs an oil catch can soon too
|
https://cimg2.ibsrv.net/gimg/www.evo...e62f91f7c1.jpg
https://cimg3.ibsrv.net/gimg/www.evo...70f1554b3e.jpg https://cimg4.ibsrv.net/gimg/www.evo...9322026029.jpg looking for the clip on the light and the bracket for the line that goes on top of the mount anyone has them? https://cimg5.ibsrv.net/gimg/www.evo...f3ed26b056.jpg https://cimg6.ibsrv.net/gimg/www.evo...4bc74af84f.jpg knob off my evo 8 for sale, real nice and solid just not for me |
Why the 2.4L if only a FP Red?
|
Previous owner did that. I plan to go 6466 like my last evo but that one was a 2.0
|
got a few things done
newer ps reservoir on, cooling plate on, strut bar on, painted the heat shield black, also added some front led turn signals and rear tails led running lights by the brake lights. just need to program my new 2 key fobs and paint the coolant tank and install it. also have a box with a oil cooler I'm waiting for and shifter bushings to also install. https://cimg8.ibsrv.net/gimg/www.evo...f71ad8723b.jpg https://cimg9.ibsrv.net/gimg/www.evo...ae68393e3f.jpg https://cimg0.ibsrv.net/gimg/www.evo...d760872ebd.jpg https://cimg1.ibsrv.net/gimg/www.evo...7509b173c8.jpg |
|
Not much new got the new cam cover shaved down on the inside so the bolts don't hit so I need to install that along with a new cam sensor and the aem fuel rail I got sitting in my trunk and a fabricated top rad hose
finally got the paint off the coolant tank my friend gave me now need to paint it and install it ordered the nozzles car is missing from stm along with a few more clips for front bumper |
did some cleaning and a few things
got the lights cleaned, reprogramed my 2 new key fobs, did the cooling plate all installed with clips, bro put some purple washers on for looks. got the bumper mesh in and installed, oil cooler came in just need to put it on, lip got painted that came on the car all ugly, installed the fabbed up top rad hose, did the led interior lights, got the hood vent mesh painted, added nozzles that were missing on the hood etc few more things need to be done and will be done as things arrive and get ordered, next need to get front bumper re painted as it was done crappy from last person that did it, I need to install cam gear cover, find an annoying rattle under deccel, do brakes (have mapstage 2 kit sitting in storage), install shifter bushings, and install my aem fuel rail, https://cimg8.ibsrv.net/gimg/www.evo...d200363030.jpg https://cimg9.ibsrv.net/gimg/www.evo...ddfa3b2f27.jpg https://cimg0.ibsrv.net/gimg/www.evo...83f8751ddd.jpg https://cimg1.ibsrv.net/gimg/www.evo...0760921d71.jpg https://cimg2.ibsrv.net/gimg/www.evo...e0522a816e.jpg https://cimg3.ibsrv.net/gimg/www.evo...cb954ff622.jpg https://cimg4.ibsrv.net/gimg/www.evo...1adf291081.jpg https://cimg5.ibsrv.net/gimg/www.evo...2674ad012a.jpg https://cimg6.ibsrv.net/gimg/www.evo...5eca009907.jpg https://cimg7.ibsrv.net/gimg/www.evo...015c8b85e9.jpg https://cimg8.ibsrv.net/gimg/www.evo...5b701db0b8.jpg https://cimg9.ibsrv.net/gimg/www.evo...503c49daed.jpg |
ayeeeeee mami lookin good
|
|
changed out bov and piping, new upper pipe already has ait sendor and bung on the back side where u cant see it to go speed density soon
https://cimg6.ibsrv.net/gimg/www.evo...9bbd102737.jpg https://cimg7.ibsrv.net/gimg/www.evo...5782acb9d6.jpg |
did oil change, re routed a power cable that was all over from previous owner, tightened the dp bolts, checked my upper pipe and moved it a bit on adjustment, need to get plugs today and change them car Is breaking up a bit under boost.
|
When its pushing the dip stick up, that is usually a sign of excessive blow by past the rings.
|
haven't had that issue yet thank god lol
added the nozzles lines etc so now I can use my spray to clean the windshield and added the bumper vent that goes inside of it . |
got the front mount for a good deal and out of these 3 triples one good one can be put together and getting it at a steal with an lsd for the front also.
got new plugs and a plug gapper for them so ill be doing those today just got off the phone with stm and ordered both fender liners along with all hardware for them and the driver side bottom panel that my car is missing along with a clip I need for the inside liner. got the works on a 4 inch custom IC to be made just waiting to sell a few extra parts I have to make that happen. https://cimg3.ibsrv.net/gimg/www.evo...4b9e35dbd.jpeg https://cimg4.ibsrv.net/gimg/www.evo...5198ba34c0.jpg |
All times are GMT -7. The time now is 11:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands