A military member's Build overseas
Thread Starter
Evolving Member
iTrader: (3)
Joined: Sep 2011
Posts: 121
Likes: 0
From: Spangdahlem, Germany
A military member's Build overseas
Updated 23 Feb 2012
Well, I figured I'd make a build thread since everyone seems to. I'm stationed in Germany and I'm stuck with waiting forever on parts and I'm limited to just 4 track weekends a year here. Our first one will be in April so I'm patiently waiting on all my parts to get here so I can get underway. I'll update this as I get parts ordered and take pics as I get parts.
2003 Evolution V///
Purchased and waiting to arrive:
MAP EF4
custom intake manifold made from a stock intake manifold
Already purchased and in the garage:
Custom 3" side dump exhaust with 02 dump, exits out from bumper, hardly any bends
1000cc injectors (thinking of going to 2150cc though)
Double pumper
Japspeed tubular manifold
hallman pro manual boost controller
4g64 crank
Map stage 1 stroker assembly
wiseco 10:1 pistons .040 overbore
H-beam rods
ACL bearings
6 puck clutch
Still need to purchase:
slicks
cams (thinking of going with Buschur BF272s, but may start the season without them)
Looking for 600-650whp on E85. Can't wait to get underway.
Well, I figured I'd make a build thread since everyone seems to. I'm stationed in Germany and I'm stuck with waiting forever on parts and I'm limited to just 4 track weekends a year here. Our first one will be in April so I'm patiently waiting on all my parts to get here so I can get underway. I'll update this as I get parts ordered and take pics as I get parts.
2003 Evolution V///
Purchased and waiting to arrive:
MAP EF4
custom intake manifold made from a stock intake manifold
Already purchased and in the garage:
Custom 3" side dump exhaust with 02 dump, exits out from bumper, hardly any bends
1000cc injectors (thinking of going to 2150cc though)
Double pumper
Japspeed tubular manifold
hallman pro manual boost controller
4g64 crank
Map stage 1 stroker assembly
wiseco 10:1 pistons .040 overbore
H-beam rods
ACL bearings
6 puck clutch
Still need to purchase:
slicks
cams (thinking of going with Buschur BF272s, but may start the season without them)
Looking for 600-650whp on E85. Can't wait to get underway.
Last edited by BigDaddyCain; Feb 24, 2012 at 07:05 AM.
Newbie
Joined: Nov 2011
Posts: 4
Likes: 0
From: Scwheinfurt, Germany
Where you at in germany? What kind of track racing do you want to do? THere is way more than 4 weekends givin the work schedule, Race Wars, Speed Days and open track days Hockenhiem and NurbergerRing....
Trending Topics
Thread Starter
Evolving Member
iTrader: (3)
Joined: Sep 2011
Posts: 121
Likes: 0
From: Spangdahlem, Germany
Yea I'm in the AF too. I'm POL, I work on the fuel trucks that issue fuel to the jets. I'm getting out though, so the build is on hold currently. I'm debating to go ahead and do it now, or finish it when I get home to SC.
